All Products

The Wireless Solutions RG142PNMBM-2 coaxial cable assembly uses 2 feet of RG142 plenum-rated, double-shielded cable. This cable jumper assembly is fitted with an N male connector and a BNC male connector. The crimp connectors include heat shrink. This Wireless Solutions 2 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

RF INDUSTRIES BNC male connector for RG59, 59A, 59B, 62, 62A, 62B, 62C and 210 cables. Nickle plated body, gold pin Crimp pin & braid. 75 ohm. Learn More

CONNEX CORP. SMA Male Right Angle Long Barrel connector for RG58 cable. Commonly used with Breezecom Radios. Learn More

LAIRD 450-470 MHz Phantom Elite 3 dB-MEG low visibility black antenna. Order Motorola style mount and cable separately Learn More

RF INDUSTRIES UHF male connector for PROFLEX and Times AA3096 cables. Nickle plated body and silver plated contacts. Crimp center pin, crimp on braid. Learn More

The Larsen NMOMMRMPL vehicle antenna magnetic mounti for use with Motorola-style mobile antennas. This Motorola-style magnet mount provides temporary, easily removable vehicle mounting for mobile antennas. This high frequency 0-3000 MHz magnet mount features a fully weatherized cable interface and a center pin that is removable to convert it from a standard frequency mount to a high frequency mount. The mobile antenna vehicle mount is constructed from a zinc alloy body plated with copper and nickel that is black coated. The magnetic base has a protective coating designed to prevent damage to your vehicle.The vehicle antenna mount thread size is 1-1/8 inch -18. The Larsen vehicle magnetic mount for Motorola-style antennas includes 12 feet of RG58A/U cable. Mini UHF male connector is installed. Learn More

LAIRD 7/8" Heavy Duty Boom Mounting Kit. Used to convert 7/8" boom yagis to mount. Learn More

POLYPHASER 2.0 to 6.0 GHz water type flange mount coaxial protector. 10 watt transmitt. N/F equipment side and N/M connector side. Learn More

MAXRAD 1575.42 MHz 26 dB GPS 3-5 volt active magnet mount antenna. Square black radome. Includes 15' RG174 and installed SMA connector. Learn More

ANDREW mini UHF male (F1MU) connector for FSJ1-50A, 1/4" superflexible Heliax cable. Captivated silver pin, crimp ferrule. Nickle body. Learn More

RFI Reverse Polarity N/Male (Female) to standard N/Female (jack). Nickle plated brass body, gold center pin. Learn More

MICROLAB 3db Hybrid Coupler. Multi-Band 700/2700 Mhz. 30dB isolation. N Female connectors. Single and Multi-band ranges for Tetra, Cellular, PCS and UMTS. Learn More

Laird 2.4 GHz In-line Bulkhead Lightening Arrestor protector. 1000 Watts. 50 Ohms. N-Female on both ends. Learn More

POLYPHASER 2.0 to 6.0 GHz water type bulkhead mount coaxial protector. 10 W transmitt. N/F termination on both ends. Learn More

COMMSCOPE 2 3/8" x 63" Plain end pipe. Hot Dipped Galvanized steel. Learn More

TERRAWAVE SOLUTIONS BNC Plug (M) Connector for 100 Cable Learn More

BAND-IT Buckles for C204 (Sku 439832) band. Package of 100. Learn More

BUD INDUSTRIES Air and Moisture Vent. Style B. All plastic construction. Includes housing, gasket and locking nut. Light Gray. Learn More

PCTEL BLUEWAVE 450-470 MHz, 10 dBd gain yagi antenna. 7 element, 250 watts. N Female connector with 2 ft. pigtail. Includes mounting hardware BWC1001A. Learn More

The Andrew 7574285-00 blank dummy module is for the node A repeater system. This amplifier module fills any unused slot in the repeater. The Andrew dummy BDA module should be used to maintain correct airflow in the subrack. Learn More

PCTEL BLUEWAVE 890-960 MHz, 12 dBd gain yagi antenna. 11 elements, 200 watts. N Female connectoron 2 Ft. pigtail. Includes mounting hardware BWC1001. Learn More

Advanced silcon (SADS) surge protection for 24VDC/VAC lines. Learn More

RF INDUSTRIES TNC male right angle connector for RG142. Nickle plated body, gold plated center pin, teflon dielectric. Crimp connector. Learn More

WIRELESS Solutions 3' TWS-195 Antenna extension cable with N Female (M Center Pin) to RPSMA Female (F center pin). Includes heat shrink. Learn More

TERRAWAVE SOLUTIONS 0-6 GHz Lightning Arrestor with TNC Plug (Male) to TNC Bulkhead Jack (Female). Includes L Shaped Mounting Bracket. Learn More

NEWMAR copper ground bar for use with 19" racks. Bolts to the back ofthe rack. 9/32" holes spaced 1.5" apart.Includes mounting hardware. Learn More

The Havis 3" Filler Plate. Learn More

The Havis 1-Piece Equipment mounting bracket has a 2.5" mounting space. It fits the Motorola XTL 2500, XTL5000-05, APX 7500, APX 6500. Learn More

TIMES MICROWAVE Indoor/Outdoor fire- retardant LMR-600 coaxial cable. PVC jacked. Black. CMR rated. Learn More

AMPHENOL PL259 connector. Silver plated body for low temperature soldering. For RG8, 9, 11, 13, 63, 87, 149, 213, 214, 216, & 225 cables. Learn More

POLYPHASER 125-1000 MHz general coverage bulkhead mnt. protector. 50,000 amps surge. <220uJ throughput energy. Power based on freq. N male on antenna port. Learn More

AMPHENOL mini UHF male crimp connector for RG58/U, 58A, 58B and 58C cable. Black finish. Single pack. Learn More

Laird Y8963 yagi antenna is gold-anodized and fully welded to create a greater gain because of its ability to focus a signal in one direction. This yagi antenna operates in the 896 - 970 MHz frequency range. The Y8963 yagi is 3-elements providing 6 dBd gain with a maximum power input of 300 watts. The yagi is terminated with an N female connector and includes the stainless steel mounting hardware. Learn More

RF INDUSTRIES SMA male connector for RG8/U, 9913, LMR400 Learn More

Andrew Solutions EASIAX manual cable preparation tool is made for use with 7/8 inch HELIAX coaxial cable, including: AVA5, LDF5, and VXL5. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More

MAXRAD 2.4-2.485 GHz enclosed yagi 15 dBi gain antenna. Includes 18" LMR-195 jumper with N-female termination. Learn More

Andrew EASIAX manual cable preparation tool is made for use with 3/8 inch and 1/2 inch superflex HELIAX coaxial cables, including: FSJ2, FSJ4, ETS2, RXL2 and RXL4. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew EASIAX cable preparation tools. Learn More

HARGER 1/4" thick x 2" wide x 6" long ground bar w/ insulators & brackets. 10 pre-drilled 7/16" holes. Holes spaced .75" T/B, 1" L/R. "P" pattern Learn More

Laird PC9013N yagi antenna is designed for 800 MHz, ESMR, SMR, cellular or conventional applications. The 13-element antenna has 13 dBd gain and operates in the 902 - 928 MHz frequency range. This yagi antenna has a maximum power input of 200 watts and includes a 19 inch pigtail terminated with an N female connector. U-bolts; maximum mast diameter is 2-1/8 inches are supplied for mounting. Learn More

DURACOMM hood for LP series power supplies. Fits Motorola CDM radios. Learn More

RF INDUSTRIES Mini-UHF female connector for RG142, 55, 223 and 400 cables. Nickle plated body, silver pin. 3 piece construction, crimp style. Learn More

AMPHENOL CONNEX S SMA male connector for RG58, 141, 400, LMR195 and Ultralink cable. Solder center pin. Learn More

RPTNC Male/Plug to N Female/Jack Adapter for Changing Connector Styles Learn More

HARGER 5/8" x 8' copper-clad steel ground rod Learn More

POLYPHASER 800-2500 MHz protector. Used in installations when DC is required to pass in route to powering shelter-based equip. +6 VDC. Equip. N/F - Ant. N/F. Learn More

TERRAWAVE N Bulkhead Jack (F Center Pin) Connector for 100 Cable. Learn More

RF INDUSTRIES Interseries Adapter. SMA female to SMA male right angle adapter. Gold plated center pin and nickel body and teflon dielectric. Learn More

RF INDUSTRIES TNC female to TNC female adapter. Learn More

COMMSCOPE 1/4" x 2-1/2" x 12-1/2" Universal Ground Bar. Made of solid copper with 33 pre-drilled holes. Ideal for all grounding app's incl towers & rooftops. Learn More

COMMSCOPE Click-On Hanger Hardware Kit for 1/2",5/8" or 7/8" coaxial cable. For use with 3 stack hanger in 3/8" size. Constructed of stainless steel. Learn More

The Times Microwave LMR-100A-PVC-W LMR100 flexible, low loss coaxial cable (white) offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. This 50 Ohm coax cable has a stranded outer conductor and copper-clad steel center conductor. The 1/8 inch LMR-100 transmission line has a foil shield and 90 percent coverage braid shield for lower loss. A white PVC jacket adds flexibility and color compatibility for indoor applications. RG174 connectors should be used.The Times LMR-100 flexible, low loss coaxial cable is available in bulk and is priced per foot. Learn More

AMPHENOL SMA male connector for RG58/U, 58A/U, 58C, 141, 141A, LMR-195 and Ultralink cable. Solder center pin. Purchase reducers to use with RG55 & RG1 Learn More

RF INDUSTRIES UHF Female to BNC female adapter. Learn More

The TerraWave 100-02-03-P18" coaxial cable assembly uses 18 inches of TWS-100 antenna extension cable. This cable jumper assembly connects a RP-TNC Male (Female center pin) to a RP-TNC bulkhead Female (Male center pin).The TerraWave 18 inch coax cable assembly includes heat shrink. Learn More

LAIRD 450-470 MHz Phantom Elite 3 dB-MEG low visibility white antenna. Order Motorola style mount and cable seperately. Learn More

COMMSCOPE Click-On Hangers. For use with LDF4-50A 1/2" diameter cable. Package of 10. Recommended spacing every 3' up to 150 mph wind speed, 2'over 150 mph. Learn More

RF INDUSTRIES TNC female to N male straight adapter, Learn More

LARSEN 136-512 MHz NMO quarter wave mobile antenna only. Order desired NMO 3/4" mount separately. Learn More

LAIRD 902-928 MHz Phantom 3 dB gain permanent mount screwbase antenna. Base secures with locknut. Accepts N male connector. Black. Learn More

MAXRAD 144-174 MHz. 1/2 wave, no ground plane 2.4 dB antenna with spring. Order Motorola style mount separately. Learn More

RF INDUSTRIES SMA male RP (reverse polarity) connector for RG8/U, 9913, LMR400. Learn More

AMPHENOL Mini-UHF female jack connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickel plated body, gold pin. Learn More

LAIRD 450-470MHz 5 element directional antenna. 9.2 dB gain 300 watt. Direct N female termination. Mounting hardware included. Gold anodized for long life. Learn More

CommScope SnapStak Snap-in hangers for 7/8" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction Learn More

POLYPHASER BFD Flange Bulkhead Adapter for 7/16 DIN arrestors. Learn More

LARSEN 40-50 MHz 200 watt base loaded unity gain 1/4 wave chrome mobile antenna. Purchase Motorola style mount separately. Learn More

LAIRD 890-960 MHz Phantom Elite 3 dB low visibility black antenna. Order Motorola style mount and cable separately. Learn More

RPTNC Male/Plug to N Male/Plug Adapter for Changing Connector Styles Learn More

N Female/Jack To N Female/Jack Adapter for Extending Cables Learn More

RF INDUSTRIES UHF male connector for RG142. Nickle body, silver pin. Crimp center pin, crimp on braid. Learn More

Larsen YA5900W yagi directional antenna is designed for high performance and long life in the most demanding applications. Larsen's black-finished welded yagi directional antenna is a 7-element antenna with 11 dBi directional gain and operates within a frequency range 890 - 960 MHz. The maximum power input is 300 watts and the antennas is terminated with an N Female connector. Stainless steel U-bolt mounting hardware for pipes up to 1-5/8 inch is included and makes installation easy.This yagi antenna uses a rugged, fully-welded design that is strengthened by aluminum alloys and completely weatherized. Learn More

ESR/TRIPP LITE 7 outlet filtered surge suppressor. Protects electronic equip- ment from AC spikes and surges. RFI and EMI filters. UL 1449 and CSA listed. Learn More

RF INDUSTRIES Mini-UHF male connector for RG142/U. Nickel body silver center pin. Crimp: Center .068 Ferrule: .213 Learn More

RF INDUSTRIES BNC male to SMA male straight adapter. Nickle plated body, gold plated contacts. Learn More

LARSEN UHF coil. Use with appropriate whip for desired frequency. Black finish to match Kulrod T(TM) whips. Learn More

PCTEL MYA9306 aluminum yagi antenna operates in the 896 - 970 MHz frequency range. This 900 MHz yagi antenna is unsurpassed in it's price to performance ratio. The MYA9306 is a 3-element, 8.1 dBi gain yagi that features rugged 6060-T6 aluminum construction, stainless steel hardware, and through boom mounting of all elements for years of reliable service. Elements are DC grounded to the boom. Maximum power input is 150 watts and is terminated with an N Female connector. Mounting hardware is included. Learn More

Andrew DB408-B omnidirectional, exposed dipole antenna operates in the frequency range 450 - 470 MHz. The 6.6 dB gain UHF dipole omni can handle 250 watts. The antenna comes with an N male connector on the end of a flexible lead. Included with the antenna is a DB365-OS pipe mounting kit for 1.25 - 3.5 inch OD round members. This Andrew Solutions 450 - 470 MHz UHF antenna featuring broad response is ideal for duplex operations. The DB408 is extremely rugged, has extra heavy-duty construction and is moisture and lightening resistant. The antenna meets RoHS 2002/95/EC. Learn More

POLYPHASER 1.5-400 MHz general coverage bulkhead mnt. protector. 50,000 amps surge. <10mJ throughput energy. Power rating based on freq. UHF female conn. Learn More

LARSEN UHF male solder Female and UG175 adaptor for use on RG55, 58, 141 and 142 cables. Learn More

POLYPHASER 125-1000 MHz general coverage bulkhead mnt. protector. 50,000 amps surge. <220uJ throughput energy. Power based on frequency. N female connectors. Learn More

AMPHENOL UHF male connector for RG58 cable. FCP clamp style. No special tools or soldering required. Learn More

RF INDUSTRIES TNC male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Learn More

Laird PC906N yagi antenna is designed for 800 MHz, ESMR, SMR, cellular or conventional applications. The 6-element antenna has 8.5 dBd gain and operates in the 896 - 940 MHz frequency range. The PC906N yagi antenna has a maximum power input of 200 watts and includes an a 19 inch pigtail terminated with an N female connector. U-bolts; maximum diameter is 2-1/8 inches are supplied for mounting. Learn More

Telewave ANT150D single folded dipole antenna covers the 138 - 174 MHz frequency range. This VHF antenna has a precision phasing harness for optimum performance and is terminated with an N male connector. The dipole antenna achieves 1 - 2.5 dBd gain dependent on its pattern and has a maximum power input of 500 watts. Clamp set is included, need to purchase mast separately.This Telewave ANT150D adjustable pattern omni antenna is constructed with 6061-T6 aluminum and is welded at the base for maximum strength. Elements are sealed with a high-tech coating that protects against corrosive gases, UV radiation, salt spray, acid rain and wind blown abrasives. Learn More

RF INDUSTRIES UHF female to BNC male adapter. Learn More

POLYPHASER 125-1000 MHz general coverage bulkhead mnt. protector. 50,000 amps surge. <800uJ throughput energy. Power based on freq. N male on antenna port. Learn More

RF INDUSTRIES N male to BNC male adapter. Silver plated body, gold plated contacts. Learn More

AMPHENOL UG-914 BNC female to BNC female straight adapter. Learn More

RF INDUSTRIES Mini-UHF female connector for RG8X. Nickel plated body, silver pin, 3 piece construction, crimp style. Learn More

RF INDUSTRIES SMA male to SMA male straight adapter. Gold plated body, gold plated contacts. Learn More

RF INDUSTRIES Mini-UHF female to Mini-UHF female adapter. Learn More

RF INDUSTRIES N female to UHF female adapter. Silver plated body, gold plated contacts. Learn More

RF INDUSTRIES UHF male connector for RG8, RG8A & RG213 cables. Silver plated shell, silver plated body. Teflon insulation. Solder pin and braid. Learn More

LAIRD 450-470MHz 3 element directional antenna. 7.1 dB gain 300 watt. Direct N female termination. Mounting hardware included. Gold anodized for long life. Learn More

POLYPHASER 125-1000 MHz bulkhead NEMP protector. N male on equipment side, N female on antenna side. Learn More

RF INDUSTRIES Mini-UHF male to TNC female straight adapter. Learn More

POLYPHASER DC to 2.4 GHZ repl. gas tube lightning arrestor. Passes up to +/- 60 VDC, 10A max. Bi-directional. Bulkhead mount. N/F on both sides. Learn More

LAIRD 150-174 MHz quarterwave black antenna with spring. Order Motorola style mount seperately. Learn More

AMPHENOL mini UHF male crimp connector for RG58/U, 58A, 58B and 58C cable. RFX version. Single pack. Learn More

TELEWAVE 406-512 MHz exposed dipole array antenna. Adjustable pattern. 3dB gain, 500 watts. Includes harness with N male termination. Mast not included. Learn More

RF INDUSTRIES SMA Female to N Female Straight Adapter. Nickel plated body, gold plated pin, teflon dielectric. Learn More

TIMES 7/16 DIN female connector for LMR400 coaxial cable. Solder center pin, clamp on braid. Learn More

The Belden 9913 RG8/U coaxial cable (black) is low loss with an "air" dielectric. This 50 Ohm coax cable has a solid center conductor and a semi-solid polyethylene dielectric. A 100 percent shield coverage prevents loss.The braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. This RG8 cable requires 9913 specific connectors.The Belden RG8/U low loss coaxial cable with "air" dielectric is available in bulk and is priced per foot. Learn More

Andrew DB420-B omnidirectional, exposed dipole antenna operates in the 450 - 470 MHz frequency range. This UHF omni dipole antenna is 9.2 dBd gain, can handle up to 250 watts and is terminated with an N male connector at the end of a flexible lead. Included wit the antenna is a DB356-OS pipe mount lit for 1.25 - 3.5 inch OD round members. Andrew Solutions 450 - 470 MHz UHF antenna featuring broad response is ideal for duplex operations and is extremely rugged. This antenna meets RoHS 2002/95/EC.
Additional shipping charges may apply- ships freight only. Learn More

RF INDUSTRIES TNC male connector for Belden 9913 and Times LMR400 cables. Silver plated body, gold plated center p pin. Solder center pin, clamp on braid. Learn More

Westell 746-896 MHz 11dBi aluminum finish yagi. 8 element. 100 watt. 50 ohms. N-Female Connector. Mounting clamps included. Learn More

The TerraWave 195-07-18-P3' cable assembly connects an N-style plug to a SMA plug. This jumper assembly uses 3 feet of TWS-195 antenna extension cable. One end of the coax cable has an N Male (Male center pin) and the other a SMA Male (Male center pin).The TerraWave 3 foot cable jumper assembly includes heat shrink. Learn More

MAXRAD 40dB 3-5V low noise, high gain permanent mount GPS antenna. Features high out-of-band rejection and weather proof white cone-shaped housing with TNC(F) Learn More

MAXRAD shock spring for low band, high band/3dB and UHF 5dB antenna models. Not for use with MAX base antennas. Learn More

TERRAWAVE RPSMA Female to Right Angle RPSMA Male Adapter. Learn More

GEARWRENCH 14pc 6-Point SAE Combo Wrench Set includes: 1/4, 5/16 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 3/4, 13/16, 7/8". Non-ratcheting Learn More

The PCTEL MHB5800 5/8 wave antenna operates within the VHF frequency range, 144-174 MHz. This VHF mobile antenna is field-tunable and features a 3 dB gain with or without a ground plane. Maximum power input is 200 watts. The 58 inch whip antenna utilizes a chrome coil design with the enhancements of a heavy-duty tapered rod for maximum durability in harsh environments. The two-way antenna is able to maintain desired resonant frequency through heavy shock vibrations. The PCTEL heavy-duty whip-style antenna is designed for mobile two-way communication within the 144-174 MHz VHF frequency band.Order Motorola style mount separately. Learn More

MAXRAD brass permanent body mount for a 3/4" hole. Includes 25' RG58/U and loose mini-UHF connector. Formerly Part NMO58U//PL. Learn More

The Andrew L4A-NMDM-6-P SureFlex cable assembly process uses a 6 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN Male and N Male connectors installed on each end.The Andrew 6 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

TERRAWAVE Universal Pole Mount Kit Fits up to a 12 in. Diameter Pole. Mounts TW 18x16 Poly enclosures. Learn More

The PCTEL Maxrad GMLFML195C magnetic mount is a Motorola-style, NMO mobile antenna mount that offers removability. No drilling into the vehicle is required for installation making the location of the magnetic mount easy to adjust.The vehicle antenna mount thread size is 1-1/8 inch - 18, and the magnetic base is 3 1/4 inches. The magnetic base has a rubber boot to prevent damage to your vehicle. This NMO mount includes 12 feet of Proflex Plus 195 low loss coax cable. A TNC male connector is installed.The PCTEL black vehicle magnet mount is designed for use with Motorola-style mobile antennas of a higher frequency (0 - 3000 MHz). Learn More

RF INDUSTRIES SMA female to SMA female straight adapter. Nickle plated body, gold plated contacts. Learn More

The Larsen NMOMMRDSSMA vehicle antenna magnetic mount is for use with Motorola-style, NMO mobile antennas. This Motorola-style magnet mount provides temporary, easily removable mounts for mobile antennas. This high frequency 0-3000 MHz NMO mount features a fully weatherized cable interface and a center pin that is removable to convert it from a standard frequency mount to a high frequency mount. The mobile antenna mount is constructed from a zinc alloy body plated with copper and nickel. The magnetic base has a protective coating that prevents damage to your vehicle.The vehicle antenna mount thread size is 1-1/8 inch -18. The Larsen vehicle magnetic mount for Motorola-style mobile antennas includes 12 feet of RG58A/U dual shield cable. SMA male connector is installed. Learn More

RFI Hex/Knurl Combo N male for RG8X/240 Captivated center pin, crimp ferule. Silver plated body, gold center pin. Learn More

COMMSCOPE Self-locking Hanger for 1/2" Radiating Cable. 100 per package. Black in color. Learn More

The TerraWave TWS-195 low loss braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. This low loss 50 Ohm coax cable features a foil shield and 90 percent braided shield. It has a polyethylene, gas-injected UV-resistant jacket. The low loss transmission line can be used in almost any application where handling characteristics, improved shield and low loss is required. The low loss coax cable has a comparable performance to RG142 cable and uses RG58 or RG142 connectors. The TerraWave TWS-195 low loss coax cable is available in bulk and is priced per foot. Learn More

PolyPhaser Straight Gastube with aluminum body, DC to 7 GHz, N-F on surge side, N-M on protector side. Bulkhead mount with bracket for grounding or mounting. Non-replaceable elements. Learn More

The TerraWave 400-07-07-P10' coaxial cable assembly uses 10 feet of TWS-400 antenna extension cable. This cable jumper assembly connects a N-style Male (Male center pin) connectors to both ends.The TerraWave 10 foot coax cable assembly includes heat shrink. Learn More

MAXRAD 380-520MHz wideband 2dB with ground plane / unity gain without black antenna with stainless steel spring. 200 watts. Order Motorola style mount separately. Learn More

RF Industries cable stripper easily cuts jacket, braid and dielectric in one step. This strip tool quickly prepares LMR 400 type cables. The coax three-level stripper preps a wide variety of popular cables including LMR 400, RG 214, RG 8, RG 213, Belden 9913, and Cushcraft 93605. RF Industries coax stripper is designed to prevent over-penetration and cable distortion. Strip lengths are manufactured to industry standards. Learn More

RF INDUSTRIES BNC female to SMA female adapter. Use with Motorola cellular phones. For use with OKI 900 cellular phones, use sku# 72604. Learn More

The Wireless Solutions LMR400NMNF-6 coaxial cable assembly uses 6 feet of LMR-400 cable. This cable jumper assembly is fitted with an N female (44728) connector and an N male (14515) connector. The crimp connectors include heat shrink. This Wireless Solutions 6 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

TerraWave T09110Y11206 yagi directional antenna operates within the frequency range 824 - 960 MHz and provides high gain at 11 dBi. Maximum power input is 100 watts with N-style Jack termination. A 12 inch pigtail is included along with articulating mount. The TerraWave directional yagi antenna is designed for applications in the 900 MHz frequency, including radio frequency identification (RFID) applications, cellular systems, global system for mobile (GSM) communications, code-division multiple access systems (CDMA) applications, multipoint applications and wireless video links. Learn More

The Wireless Solutions RG142PNMBM-3 coaxial cable assembly uses 3 feet of RG142 plenum-rated, double-shielded cable. This cable jumper assembly is fitted with an N male connector and a BNC male connector. The crimp connectors include heat shrink.This Wireless Solutions 3 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

PCTEL BGYD890K yagi antenna is engineered to provide high gain broadband performance between the frequencies of 890 - 960 MHz. Directional antenna features aluminum elements and a fully welded dipole on the boom. This yagi antenna is a 7-element black powder coated over stainless steel antenna assembly. The maximum power input is 200 watts. The antenna has a low loss 2 foot RG213 feed with an N Female connector. A high-strength mounting clamp is supplied for vertical or horizontal polarization. Learn More

PCTEL BLUEWAVE 890-960 MHz 14 dBd gain yagi antenna. 18 elements, 200 watts. N Female connector on 2 ft. pigtail. Includes mounting hardware BWC1001. Learn More

The Wireless Solutions RG142PNMNM-2 coaxial cable assembly uses 2 feet of RG142 plenum-rated, double-shielded cable. This cable jumper assembly is fitted with N male connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 2 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

TerraWave T09150Y11206T is a directional yagi antenna that operates in the frequency range 824 - 960 MHz. This yagi provides a high gain of 15 dBi with a maximum power input is 50 watts. Included with this directional yagi antenna is an articulating mount and 12 inch pigtail with N Jack (female) connection.TerraWave 15 dBi directional yagi antenna is designed for applications in the 900 MHz frequency, including radio frequency identification (RFID) applications, cellular systems, global system for mobile (GSM) communications, code-division multiple access systems (CDMA) applications, multipoint applications and wireless video links. Learn More

The TerraWave TWS-400DB direct burial coaxial cable contains a weatherproofing compound around the foil and braid allowing for continuous performance even if cable has sustained damage. The 3/8 inch 50 Ohm coax cable has a solid center conductor and UV-resistant jacket. This braided cable allows for a 1 inch bending radius for applications requiring greater flexibility. The TerraWave direct burial low loss coaxial cable is available in bulk and is priced per foot. Learn More

RFI UHF Male Connector for LDF4-50A & LCF12-50J. Captivated silver center pin. White bronze plated brass body. Includes 2 o-rings and silicone tube. Learn More

The TerraWave TWS-195FR-M coaxial cable (black) features a non-halogen, low smoke, fire-retardant cable designed for in-building applications. The TWS-195 cable is MSHA approved for mining operations. This low loss 50 Ohm coax cable features a 90 percent braided shield. The TWS-195 transmission line can be used in almost any application where handling characteristics, improved shield and low loss is required. The fire-retardant low loss coax cable has a comparable performance to RG142 cable and uses RG58 connectors. The TerraWave fire-retardant TWS-195 low loss coax cable is available in bulk and priced per foot. Learn More

The Wireless Solutions LMR400NMNM-5 coaxial cable assembly uses 5 feet of LMR-400 cable. This cable jumper assembly is fitted with N male (14515) connectors on each end. The crimp connectors include heat shrink. This Wireless Solutions 5 foot cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

MAXRAD magnet mount with 12' RG-58/U and attached FME female connector. Learn More

MAXRAD 144-174 MHz 3 dB coil. Learn More

PCTEL 3/8" or 3/4" diameter low profile thick roof mount for up to 1/2" deep. Accepts low profile and MOSAIC antennas. Has 30' RG58/U cable. NO connector Learn More

TERRAWAVE RPSMA Jack (F, M Center Pin) to N Style Plug (M) Adapter. For 50 ohm cable. Learn More

LAIRD dual band 2400-2500/4900-5850 MHz Phantom low profile NMO mount antenna. Order Motorola style mount and cable separately. Learn More

TERRAWAVE 9 Port Enclosure Ground Bus Bar. Includes 2 self-tapping screws. Learn More

The PCTEL GPS-TMG-HR-26 timing reference antenna features a 26 dB amplifier and narrow band high rejection filtering specifically designed to support long-lasting, trouble-free deployments in congested cell-site applications with severe interference around the GPS L1 frequency. The proprietary quadrifiliar helix design, coupled with multi-stage filtering provides superior out-of-band rejection and lower elevation pattern performance than traditional patch antennas. The unique radome shape sheds water and ice, while eliminating problems associated with bird perching. Learn More

WIRELESS SOLUTIONS 2' TWS-400 Antenna extension cable with N-Style Female (M center pin) to N-Style Female (M center pin). Includes heat shrink. Learn More

The TerraWave 400-07-07-P20' coaxial cable assembly uses 20 feet of TWS-400 antenna extension cable. This cable jumper assembly connects N-style male (Male center pin) connectors to both ends.The TerraWave 20 foot coax cable assembly includes heat shrink. Learn More

TELEWAVE 148-174 MHz directional yagi antenna. 5dB gain, 500 watts. Includes harness with N female termination. and mounting hardware. Learn More

RF INDUSTRIES SMA female connector for RG174, RG188, RG316 cables. Nickel plated body, gold plated pin, teflon dielectric. Crimp attachment. Learn More

PolyPhaser Straight Gastube with aluminum body, DC to 7 GHz, N-F on surge side, N-F on protector side. Bulkhead mount with bracket for grounding or mounting. Non-replaceable elements. Learn More

TerraWave M4030030O11206 is a dual-band ceiling mount omni antenna operating in the 800 - 2500 MHz frequency range. This indoor antenna operates within the cellular (806 - 960 MHz) and PCS (1700 - 2500 MHz) frequency ranges, both achieving a gain of 3 dBi. Maximum power input for this dual-band ceiling mount antenna is 50 watts. The antenna is terminated with an N-style Jack (female) connector and includes the mounting hardware. Learn More

KLEIN Standard Diagonal-Cutting Pliers Semi-Flush Cutting. Trims plastic or printed circuit boards. Spring-loaded OAL 6-1/8", plastic dipped red handles. Learn More

TIMES MICROWAVE DC - 2.5 GHz 1/2" LMR600-75 coax cable. 75 ohm. Lower loss than RG11. Uses LMR600-75 connectors only. Learn More

The PCTEL Maxrad NMO58UFFME vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-1000 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount includes 17 feet of RG58/U coax cable and an installed FME female connector. Thread size is 1 1/8 inch - 18. Learn More

The PCTEL Maxrad NMO34 vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-960 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount requires you to purchase cable and connectors separately. Thread size is 1 1/8 inch - 18. Learn More

RF INDUSTRIES TNC male connector for RG142/U & RG55/U. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Delrin Dialectric. Learn More

The PCTEL Maxrad NMO58U-NC vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-1000 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount includes 17 feet of RG58/U cable. No connector is included. Thread size is 1 1/8 inch - 18. Learn More

The Andrew CT-7812 combination tool aids in field installation of connectors on 1/2 and 7/8 inch coax cables. The Andrew combination tool / combination wrench features open wrench ends, chamfer tool, file, inner conductor gauge, and jacket cut-off gauge.Works with Heliax 2.0 and Positive Stop connectors. Learn More

The Wireless Solutions RG142PNMNF-3 coaxial cable assembly uses 3 feet of RG142 plenum-rated, double-shielded cable. This cable jumper assembly is fitted with an N male connector and an N female connector. The crimp connectors include heat shrink. This Wireless Solutions cable jumper is built by a manufacturer-certified technician. The coax cable assembly is tested prior to shipment for 100 percent customer satisfaction and guaranteed performance. Learn More

RF INDUSTRIES UHF male connector for RG8X and Times LMR-240 cables. Nickle plated body, silver plated pin. Crimp center pin, crimp on braid. Learn More

TERRAWAVE 2.4GHz 13 dBi Panel Antenna with Integrated N-Style Jack Connector. Includes Articulating Pole Mount. Learn More

LAIRD GSM99, GSM1800, UMTS Tri-Band Omni-Directional Antenna. 0.8, 2.9, 3.9 gain. 100 Watts. Vertically polarized, N Female Connector. Order mount seperate Learn More

Telewave ANT450D is a single exposed dipole antenna that operates in the 406 - 512 MHz frequency range. This unity gain UHF 1/2 wave dipole antenna has a power input of 500 watts. The antenna is terminated with an N male connector on the harness feed. The ANT450D mounts to a 1.5 to 2.5 inch galvanized steel support pipe or tower leg. Mast is not included.This omnidirectional antenna is ideal for many applications such as trucking, business, public safety, government, and amateur radio because of the wide bandwidth and high efficiency this antenna produces. Each antenna is sealed with Txylan coating to provide protection from corrosive gases, UV radiation, salt spray, acid rain, wind blown abrasives and ice buildup. Learn More

Havis offers the widest variety of accessories and options in the industry for your mobile office solution.The Havis Side Mount Arm Rest mounts over the enclosed console and is more durable than sewn pads. The design enhances officer comfort and efficiency. Learn More

MAXRAD brass permanent body mount for a 3/4" hole. Includes 25' RG58/U and installed mini-UHF connector. Learn More

TIMES reverse polarity TNC male (Female) for LMR400 coaxial cable. Meets FCC specs for use with Spread Spectrum technology. Crimp type. DOES NOT WORK WI Learn More

RF Industries cable crimp tool kit allows you to terminate most coaxial and datacom connectors for RG58, RG59, Proflex, RG8, and RG214 among other cables. The crimp tool kit includes two cable crimper along with two die set. Die set one crimps to the following sizes: square 0.052 inch and hex 0.068, 0.100, 0.213, and 0.255 inches. Die set two crimps to the following sizes: hex 0.100, 0.128, and 0.429 inches. The ergonomically-designed crimping tool will last over 50,000 crimp cycles. A handy chart inside the lid indicates which interchangeable die is correct for the particular cable youre working with. Dies are precision die cast to provide long field service use and are easily changed. Learn More

MobileAccess2000 TSX series 700 & 800 MHz Public Safety dual-service remote unit supports the 700 MHz D-Block and SMR 800 MHz uplink and downlink frequencies. It is to be used with single mode fiber cable and a 4-Port or 8-Port Service Combiner Unit. All electrical specs based on use with 4-Port Service Combiner Unit (SCU-4). MA2000 TSX performs optical to RF conversion, amplification and filtration on signals received from the Base Unit. These signals are then combined across the Service Combiner Unit to provide a full multi-service solution across coaxial cable to a broadband antenna. The MA2000 TSX comes pre-packaged with applicable filters and other required accessories to simplify the ability to order, service, and install this solution. The MA2000 platform is the leading multi-operator, multi-service platform, which delivers multiple radio frequency (RF) services over one common and cost-effective cabling and antenna infrastructure for a complete solution. Operator RF services are bi-directionally transmitted (Uplink/Downlink) between an operator's capacity source (BTS/BDA) at the infrastructure head-end and then distributed to/from remote locations and multiple buildings, using low-loss fiber and coaxial cabling media. Learn More

TERRAWAVE 806-960 MHz 10 dBi Yagi Antenna with Articulating mount and 12" Pigtail and N-Style Jack. Learn More

WIRELESS SOLUTIONS 1' RG58 Jumper. Made of RG58 with N Female (83032) on one end and Mini UHF Male (43139) on the other. Learn More

RF INDUSTRIES SMA male connector for RG58/U, 58A/U, 58C, 141, 141A, 400 and Ultralink cable. Also RG55, 142 & 223 w/SKU 63972 ferrule. Solder center pin. Learn More

WIRELESS SOLUTIONS 3' LMR400UF Jumper. Made of LMR400UF with N Male (14515) on each end. Learn More

MAXRAD brass nut and "O" ring for 3/8" mount. 20 pack. Learn More

TerraWave Solutions M6025040MO1D3620P is a mini multiple-input and multiple-output (MIMO) omnidirectional antenna that is ceiling mountable. The antenna features six integrated 2.4 and 5 GHz dual-band omni antennas in one enclosure, making it an ideal and aesthetically pleasing antenna to support demanding applications in next generation IEEE 802.11n indoor wireless communication systems. The mini MIMO omni (mounting screw) indoor antenna features six 36 inch dual band plenum leads terminated with PRSMA connectors.TerraWave MIMO antenna is an ideal antenna to support applications in the next generation IEEE 802.11n indoor wireless communication systems. Learn More

Telewave ANT150F2 omnidirectional antenna operates in the frequency range 148 - 174 MHz. The 2.5 dB gain VHF fiberglass collinear omni antenna can handle 500 watts. Also included is a removable 24 inch RG-213 jumper and features a recessed N female connector. A dual clamp set for mounting to a 1.5" to 3" diameter support pipe is included.The rugged, high-tech radome and brass and copper element construction with a path to DC ground potential for lightening protection ensure survivability in all environmental conditions. The Telewave ANT150F2 omnidirectional antenna is ideal for use in all environmental conditions. Learn More

RF INDUSTRIES Crimp Tool W/die Learn More

HARGER long barrel compression lug. For 2/0 cable. Two holes will accept 3/8" size screws,1" on center holes. Learn More

MAXRAD 450-470 MHz directional yagi antenna. 6 elem., 10.2dB gain, 300 watt. N-female termination.Includes mounting hardware Learn More

WIRELESS Solutions 2' TWS-195 Antenna extension cable with N-Style Bulkhead Jack (F) to SMA Female (M). Includes heat shrink. Learn More

RF INDUSTRIES unidapt "T" adapter. Use with any unidapt section to make the "T" connection you need. Learn More

TERRAWAVE 2.4/5 GHz 6 dBi Outdor MIMO Omni with RPSMA Plug Connectors and L Bracket for Wall and/or Mast Mounting. 3 Pack - Dual Band Leads Learn More

COMMSCOPE stand. port cushion. For 1-1/4" corrugated cables. One hole. Learn More

RFS TRIM-LCF12-D01-A is a Special trimming tool makes the OMNI FIT Premium D01 connector attachment easier. No further tools are required to prepare the cable for the connector attachment. This is due to the unique designof the trimming tool, which combines all necessary functions in one compact tool. It can be used for CELLFLEX LCF12-50 foam dielectric cables. Learn More

PCTEL 1575 MHz GPS Reference Timing Antenna. 3.5 dBic, N Female connector. Incorporates a 40 dB low noise amplifier with enhanced filtering. Red Collar Mt incl Learn More

tessco Jumper Assembly. 3' long. Made of Cablewave SCF12-50J 1/2" Superflexible cable. N Male omni fit connector on one end and omni fit N Female on the other. Learn More

The Andrew L4A-NMNM-15-P SureFlex cable assembly process uses a 15 foot LDF4-50 1/2 inch superflexible cable with foam dielectric. This coax cable assembly has N Male (silver body, gold pin) connectors installed on each end.The Andrew 15 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

TWS-400 braided coaxial cable is low loss. This 3/8 inch 50 Ohm coax cable has a stranded outer conductor and a bare copper center conductor. Generic for LMR-400 Learn More

The Ventev TWS-600 1/2 inch standard braided coax cable with foam dielectric has a UV-resistant polyethylene jacket for outdoor use. This low loss 50 Ohm coax cable is designed with a stranded outer conductor with a copper-clad aluminum center conductor. Maximum frequency capacity is 10.3 GHz. The Ventev 1/2 inch braided coaxial cable is available in bulk and is priced per foot. Learn More

Digital Antenna 489-DB multi-band 800 - 2500 MHz high performance directional antenna can be used for all cellular frequencies. This antenna features a powerful multi-band radiator with 10 dBi gain allowing for focused power to capture more signals. The antenna includes integrated brackets to mount on a pole and has 6 inch of low loss 240 style cable terminated with an N female connector.Designed for easy outside installation on a mast or pole, the 489-DB multi-band directional antenna is ideal for use outside homes, offices and commercial buildings in areas of low cellular signal strength. This yagi antenna offers excellent signal pulling power for fixed installations where previously few solutions existed. Learn More

PCTEL MAXRAD 0-3 GHz 3/4" hole antenna mount. Includes 17' Pro-Flex Plus 195 low loss coaxial cable and SMA male connector (installed). Learn More

Wireless Solutions Universal Ground Bar Mounting Hardware kits feature a pair of angle adapters for tower mounting applications and a pair of wall mount brackets. Includes all necessary hardware. Learn More

KLEIN JOURNEYMAN High-Leverage Cable Cutter. Cuts up to 4/0 Alum, 2/0 Soft Cu and 100-pair 24-AWG comm. cable. Red/Black handles. Made in the USA Learn More

This ceiling mount indoor omni antenna is designed for applications operating in 824-960 MHz frequency, including radio frequency identification (RFID), cellular systems, global system for mobile (GSM) communications, code-division multiple access (CDMA) systems, point-to multipoint communications and wireless video links. Includes a screw on mount, and an N jack connector with a 12" pigtail. Learn More

The TerraWave 400-07-07-P6' cable assembly connects an N-style plug to a SMA plug. This jumper assembly uses 6 feet of TWS-400 antenna extension coaxial cable. This coax cable has N Male (Male center pin) connectors installed on both ends.The TerraWave 6 foot cable jumper assembly includes heat shrink. Learn More

LARSEN trunk gutter mount for use with NMO antennas. Stainless steel "L" bracket fastens with three screws. Includes 17'RG-58/U cable & connector. Learn More

COMMSCOPE SureGround for 7/8" Alum or Copper, corrugated or smooth cable w/ 24" #6 copper ground wire lead. Inlcudes factory attached two hole lug. Learn More

WIRELESS Solutions 12" TWS-195 Antenna extension cable with N Plug (M center pin) to N Plug (M center pin). Includes heat shrink. Learn More

The DuraComm DIN-5-75 five fuse terminal block produces 75 Amps of power. The terminal block has one input (12, 24, or 48 VDC) and five outputs (12, 24, or 48 VDC). The five fuse distribution block uses ATC type automotive fuses (not included) with a maximum power of 20 Amps per position, 75 Amps total. Learn More

The Havis Tilt Swivel Motion Device has a 1.82" overall height. The Motion device enables 180 degree horizontal rotation for laptops and docking stations and a 90 degree vertical tilt for a customized viewing angle. The easy-adjust and quick-release handle locks down the position of the notebook. Learn More

PCTEL BOA4357 is a heavy-duty omnidirectional fiberglass base station antenna with a gain of 7 dBi / 5 dBd. The frequency range is 430 - 470 MHz. This UHF omni antenna has a power input of 250 watts, is DC grounded and terminated with an N female bulkhead connector. The antenna has a removable drain plug to allow for inverting. BWC1005 mounting hardware is included.This UHF antenna has a linear array enclosed in a heavy-duty UV treated light gray fiberglass radome with a thick walled aluminum mounting base to achieve reliable long term use. This durable omni antenna is designed to withstand harsh environments. The BOA omnidirectional base station antenna is ideal for industrial wireless and SCADA applications. Learn More

The Larsen NMO150BK base-loaded VHF mobile antenna operates within the frequency range, 144-174 MHz. This 51.5 inch whip antenna features a gain of 3 dBd. The vehicle antenna includes a 3/4 inch hole mount, 17 feet of RG58A/U cable and a loose UHF male connector for vehicle installation. Learn More

This special trimming tool improves the cable preparation prior to connector attachment. No further tools are required to prepare the cable for the connector attachment. This is due to the unique design of the trimming tool, which combines all necessary functions in one tool. It can be used for all CELLFLEX LCF12-50 foam dielectric cables in combination with the OMNI FIT Premium connector family D01, OMNI FIT Standard family B32 and RAPID FIT families 060/062 + 070/072. The Universal Trimming Tools Series offers the additional advantage to be convertible to different connector families and cable sizes (1/4", 3/8", 1/2" and 7/8") only by changing the insert. Learn More

PCTEL 1575 MHz GPS Reference Timing antenna 3.5 dBic, N Female connector. Integrates a 26 dB low noise amplifier with enhanced filtering. Red Collar Mt & 2' pipe inc Learn More

PCTEL 1575 MHz GPS Reference Timing Antenna. 3.5 dBic, N Female connector. Incorporates a 26 dB low noise amplifier with enhanced filtering. Red Collar Mt incl Learn More

TRANSTECTOR 92V Power Over Ethernet Surge Protector. RJ-45 connectors. Wall/pole mountable. Indoor/outdoor metal enclosure. Learn More

TIMES TNC male Advantage connector for LMR-400. Gold pin. Silver plate body, gold center pin. No braid trim. Learn More

RF INDUSTRIES N male connector for RG8X and Times LMR 240 cables. Silver plated body, gold pin. Solder pin, clamp on braid. Learn More

The TerraWave TWS-100 braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. Learn More

The TerraWave TWS-200 flexible low loss braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. This low loss50 Ohm coax cable features a 90 percent coverage shield. It has a solid copper center conductor, stranded outer conductor, and polyethylene foam insulation. The transmission line features a PVC jacket with un-bounded aluminum tape allowing end stripping with automated cable prep tools. While designed for mobile antenna applications, it can be used in almost any application where handling characteristics, improved shield and low loss is required. The low loss coax cable has a comparable performance to RG142 cable and uses RG58 or RG142 connectors. The TerraWave TWS-200 low loss coax cable is available in bulk and sold per foot. Learn More

MAXRAD 136-174 MHz, 160 watt, quarter wave antenna with spring. No tuning required. Order desired Motorola type mount separately. Black. Learn More

The TerraWave 195-07-18-P2' coaxial cable assembly uses 2 feet of TWS-195 antenna extension cable. This cable jumper assembly connects an N-style male (Male center pin) to a SMA Male (Male center pin).The TerraWave 2 foot coax cable assembly includes heat shrink. Learn More

The TerraWave 195-01-02-P2' coaxial cable assembly uses 2 feet of TWS-195 antenna extension coax cable. This cable jumper assembly connects a RP-TNC Male (Female center pin) to a RP-TNC Female (Male center pin).The TerraWave 2 foot coax cable assembly includes heat shrink. Learn More

The PCTEL Maxrad NMO58AUSP vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-960 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount includes 17 feet of RG58A/U coax cable and an UHF male (PL259) connector. Thread size is 1 1/8 inch - 18. Learn More

POLYPHASER coax protector to be used in installations when DC is required to pass in route to tower top amplifiers and active antennas. +36 VDC. N/M - N/F. Learn More

COMMSCOPE 1/2" hanger adapter grommet. For use with 3/8" cable and 1/2" snap-in hangers, clip style hangers, or standard hanger kits. 10 per package Learn More

The PCTEL Maxrad NMO58UPL vehicle roof mount antenna installation hardware kit is for Motorola-style mobile antennas 0-960 MHz. This NMO mount is a brass permanent mount for a 3/4 inch hole. The PCTEL mobile antenna mount includes 17 feet of RG58/U cable and a mini UHF connector. Thread size is 1 1/8 inch - 18. Learn More

WIRELESS SOLUTIONS 3' LMR240 Jumper. Made of LMR240 with N Male (54919) on one end and SMA Male (55222) on the other end. Learn More

MAXRAD weatherproof trunk/hood groove bracket mount. Cable exits at 45 degree angle. Includes 17' RG58/U cable with no connector. Learn More

WIRELESS 15' TWS-400 Antenna extension cable with RPTNC Female (F center pin) to RPTNC Jack (M center pin). Includes heat shrink. Learn More

PCTEL BMYD806K series yagi antenna is designed to provide characteristics of a high gain, broadband, premium-quality antenna. The yagi antenna operates in the frequency range 806 - 896 MHz and has a gain of 10 dBd. This 7-element antenna is supplied with a 2 foot RG213 pigtail with an N Female connector. The antenna is anodized for corrosion resistance and has a maximum power input of 200 watts. Includes mounting hardware BWC1001. PCTEL DMYD806K is heavy duty designed with harsh conditions in mind. Learn More

RoHS complaint, lead free data line surge protector for gigabit Ethernet, shielded RJ-45. Learn More

TIMES MICROWAVE All-In-One Combination Prep Tool for prep of LMR240 cables for crimp or clamp connectors. Learn More

MOBILE MARK 2400-2485 MHz Omni Antenna. 6dBi (3.85dBd)gain. 25 watt. 19" long. Fiberglass radome. N/female connector. Mtg HW included. Special mix injection foam. Learn More

SnapSeal 4" boot assembly kit w/ 3 hole for 7/8" corrugated coax. Learn More

WIRELESS SOLUTIONS 18" TWS-100 Antenna extension cable with N Bulkhead Female (F center pin) to N Plug (M Center pin). Includes heat shrink. Learn More

The ROHN R-55SS050 50ft freestanding tower is built using the popular ROHN 55G guyed tower sections. All sections are 5ft or 10ft in length with 1.5in OD tubular legs and 7/16in solid serpentine bracing. Learn More

Learn More

LMR-195 and LMR-200 Cable Prep Tool Learn More

RF INDUSTRIES Female crimp bulkhead w/ rear mount and O ring connector for RG142.Nickel body and gold center pin. Learn More

RF INDUSTRIES Mini-UHF male to BNC female straight adapter. Learn More

TIMES TNC Male Right Angle Crimp connector for LMR-400 coaxial cable. Nickel body, Silver center pin. Teflon dielectric. DOES NOT WORK ON 400-UF. Learn More

TIMES Mini-UHF male crimp connector for LMR- 200 cable. Silver plated bodies, gold center pin. Solder center pin, Crimp on braid. Learn More

Laird PC904N yagi antenna is designed for 800 MHz, ESMR, SMR, cellular or conventional applications. The 4-element antenna has 6 dBd gain and operates in the 896 - 980 MHz frequency range. This yagi antenna has a maximum power input of 200 watts and includes a 19 inch pigtail terminated with an N female connector. U-bolts; maximum mast diameter is 2-1/8 inches are supplied for mounting. Learn More

RF INDUSTRIES TNC female to BNC female adapter. Learn More

The PCTEL MHB5800S base-loaded 5/8 wave antenna with spring operates within the VHF frequency range, 144-174 MHz. This VHF mobile antenna delivers high performance, with a gain of 3 dB. Maximum power input is 200 watts. This 58 inch whip antenna utilizes a chrome coil design with the enhancements of a heavy-duty tapered rod for maximum durability in tough environments. Order NMO mount separately. Learn More

POLYPHASER Broadband 1.5-700 MHz general coverage flange mnt. protector. 50,000 amps surge <10mJ throughput energy. Power rating based on frequency. UHF female conn. Learn More

RF INDUSTRIES BNC female 3-way Tee adapter. Nickle plated body, silver contacts, Teflon insulated. Learn More

AMPHENOL UG88C BNC male solder connector for RG-55, 58, 141, 142, 223 and 400 cable. Learn More

The Larsen NMOKNOCONN vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel-plated stainless steel permanent mount is for a 3/4 inch hole in mounting surfaces.The Larsen mobile antenna mount includes 17 feet of RG58A/U cable. Order connector separately. Thread size is 1 1/8 inch - 18. Learn More

LARSEN rain cap for NMO mount. Black only. Learn More

RF INDUSTRIES BNC male to BNC male straight adapter. Nickle plated body, silver plated contacts. Learn More

PCTEL BMOY8905 black yagi antenna has been optimized to achieve superior performance over the entire 900 MHz and UHF frequency bands. This 890 - 960 MHz directional yagi serves as a non-cellular directional base station. The 5-element antenna provides 9.0 dBd gain and has a maximum power input of 150 watts. The BMOY8903 is terminated with an N Female connector and is supplied with the MYK17 mast mount bracket. Maximum mounting pipe diameter is 1.9 inch OD pipe.Seamless aluminum construction, 360 degree welds, and a powder-coated finish give this yagi antenna superior durability and outstanding performance in all weather conditions. Learn More

The Times Microwave LMR-600 1/2 inch standard coax cable with foam dielectric has a UV-resistant Polyethylene jacket for outdoor use. The Times Microwave LMR-600 1/2 inch foam coaxial cable is available in bulk and is priced per foot. Learn More

MAXRAD 450-470 MHz directional yagi antenna. 12 ele., 12.25dB gain, 300 watt. Direct UHF female termination. Includes mounting hardware. Learn More

LAIRD 144-152 MHz Unity gain 1/4 wave black antenna. Brass button contact provides a superior match at feedpoint. Order mount separately. Learn More

RF INDUSTRIES TNC female to SMA male straight adapter. Learn More

BELDEN RG11 broadband, 75 ohm cable. 14 ga. solid center conductor. Duofoil and 40% aluminum braided shields. Black PVC jacket. Tested 5-1000 MHz. Sold per ft. Learn More

RF INDUSTRIES SMA male to BNC female straight adapter. Nickle plated body, gold plated contacts. Learn More

RF INDUSTRIES BNC male connector for RG58/U, RG58A/U, RG141 and Ultralink cable. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Learn More

Andrew DB224-A 150 - 160 MHz omni, exposed dipole antenna. This adjustable field omni antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-0S pipe mount kit for 1.25 - 3.5 inch OD round members. Maximum power input is 500 watts. This four-bay exposed dipole VHF antenna can be arranged in an offset pattern producing a higher gain of 9 dB. Omni coverage and a gain of 6 dB can be achieved through a circular pattern. Andrew Solutions DB224 omni antenna meets RoHS 2002/95/EC. Learn More

PCTEL MYA8066 aluminum yagi antenna operates in the 806 - 866 MHz frequency range. This 800 MHz yagi antenna is unsurpassed in it's price to performance ratio. The MYA8066 is a 6-element, 11 dBi gain yagi features rugged 6060-T6 aluminum construction, stainless steel hardware, and through-boom mounting of all elements -- providing years of reliable service. Elements are DC grounded to the boom. Maximum power input is 150 watts and is terminated with an N Female connector. Mounting hardware is included. Learn More

POLYPHASER DC to 2.4 GHz repl. gas tube lightning arrestor. 47W @ 150, 40W @ 450, 33W @ Cellular, 12W @ PCS. Bulkhead mount. N/F Ant.-N/M Equip. Learn More

The Times Microwave LMR-200 low loss braided coaxial cable offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization. available in bulk and sold per foot. Learn More

Andrew DB499-K is a heavy duty yagi antenna operating in the 890 - 960 MHz frequency range. This 7-element, 10 dBd gain yagi antenna is designed for challenging applications. The driven element encased in a radome to prevent corrosion and minimize the effects of severe icing conditions. This yagi has a power input of 150 watts, is terminated with a direct N female connector and includes 2 V-bolts for mounting. The Andrew Solutions rugged, heavy-duty yagi antenna meets RoHS 2002/95/EC. Learn More

Andrew DB222-A exposed dipole quasi-omnidirectional antenna operates in the frequency range 150 - 158 Mhz. This VHF field adjustable dipole antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-OS pipe mount kit for 1.25 - 3.5 inch OD round members. The omni pattern has a gain of 3 dBd and the offset is 6.0 dBd gain. This antenna meets RoHS 2000/295SEC.This Andrew Solutions DB222 omni antenna is weather-resistant and can be mounted on the top or side of a tower. Learn More

AMPHENOL UHF In-Series Reducing Adapter for RG55, 58, 141, 142. Bulkhead style, nickel plated. Learn More

The Larsen NMOKUD vehicle roof mount antenna installation hardware kit is a NMO mount for Motorola-style mobile antennas 0-1000 MHz. This nickel-plated stainless steel permanent mount is for a 3/4 inch hole in mounting surfaces.The Larsen mobile antenna mount includes 17 feet of RG58/U dual shield cable. Order connector separately. Thread size is 1 1/8 inch - 18. Learn More

RF INDUSTRIES SMA male to Mini UHF femal straight adapter. Nickle plated body, gold plated contacts. Learn More

The Larsen NMO150B base-loaded 5/8 wave antenna only (black) operates within the VHF frequency range, 144-174 MHz. This vehicle antenna delivers high performance, with a gain of 3 dB (with ground plane). Maximum power input is 200 watts. The 49 inch whip antenna is field-tunable. Order NMO mount for your Larsen VHF mobile antenna separately. Learn More

RF INDUSTRIES TNC male connector for LMR-200. Nickle plated body, gold pin. Crimp center pin, crimp on braid. Learn More

AMPHENOL TNC male connector for RG59 and RG62 cables. Mil-Crimp II termination. Learn More

AMPHENOL BNC Male Crimp Connector. RG59, RG62. Gold plated center pin, Astroplate finish body. Two crimp ferrules. Learn More

RF INDUSTRIES SMA male right angle conn. RG8X, RG30, LMR240 cables. Learn More

CONNEX N female to SMA male straight adapter. Nickel plated body, gold plated contacts. Learn More