Commscope

CommScope Plain End Pipe. 2 7/8" OD x 126" long. Galvanized steel. Learn More

COMMSCOPE stand. port cushion. For 7/8" corrugated cables. Two hole. Learn More

Andrew Solutions ATC200-LITE-USB Teletilt portable RET controller acts as an interface between your local PC, through USB or COM port, and remote electrical downtilt (RET) devices that are installed at the base station.This controller can manage up to 32 RET devices with the use of multiple junction boxes. The controller supports 1.0, 1.1 and 2.0 actuators even in a mixed tree environment. This unit is designed for portable indoor use. The ATC-LITE-USB controller supports Andrew Teletilt devices with the ATC Lite software and COBRA RET devices with COBRA software. Learn More

Andrew Solutions EZfit CPTV2 series manual cable preparation tool is made for use with 7/8 inch HELIAX coaxial cable, including AVA5 and FXL-780. Andrew cable hand prep tools prepare cable quickly and consistently.This cable stripper tool removes the cable jacketing and cores the cable foam. Plus, this cable cutting tool also flares the sheath for fast and clean connector attachment. This cable preparation tool includes one tool bit for AVA5 coaxial cable and one tool bit for FXL-780 coaxial cable. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EZfit Heliax 2.0 series manual cable preparation tools. Learn More

Andrew DB499-A is a heavy duty yagi antenna operating in the 806 - 869 MHz frequency range. This 7-element, 10 dBd gain yagi antenna is designed for challenging applications. The driven element encased in a radome to prevent corrosion and minimize the effects of severe icing conditions. This yagi has a power input of 150 watts, is terminated with a direct N female connector and includes 2 V-bolts for mounting. The Andrew Solutions rugged, heavy-duty yagi antenna meets RoHS 2002/95/EC. Learn More

The Andrew 224368 cable flare tool is designed for use on LDF5 cables. This cable flare tool is designed to separate foam from the outer conductor of 7/8 inch coaxial cable. Learn More

COMMSCOPE mounting clamps for securing base antenna to wooden pole, tower leg, or mast up to 2-3/4" diameter. Can be rotated 90 degrees. Gold iridite alum. Learn More

Andrew DB411-B quasi omnidirectional, exposed dipole antenna operates in the 450 - 470 MHz frequency range. The 9 dB gain antenna can handle up to 250 watts. This UHF dipole antenna is terminated with an N male connector at the end of a flexible lead. Included with the antenna is a DB365-OS pipe mounting kit for 1.25 - 3.5 inch OD round members. The Andrew Solutions 450 - 470 MHz UHF antenna featuring broad response is ideal for duplex operations. The DB411 is extremely rugged and is moisture resistant. The antenna meets RoHS 2002/95/EC. Learn More

The Andrew ATCB-B01-003 3 meter remote downtilt-control antenna cable assembly is used to feed data and power from the controller to the remote downtilt electrical system components. This cable jumper utilizes 3 meters of Tele-tilt cable. The jumper assembly has an AISG 8-pin socket screw lock and IP67 male and female DIN connectors. Learn More

ANDREW CNT-195 Standard Outdoor Cable with Fire Retadant Polyolefin jack. Aluminum Tape Outer conductor with tinned copper Overall Braid. Learn More

COMMSCOPE stand. port cushion. For 1/2" corrugated cables. Four hole. Learn More

The Andrew L4A-DMDM-15-P SureFlex cable assembly process uses a 15 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN male (silver body, gold pin) connectors installed on each end.The Andrew 15 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

ANDREW N-Male right angle Connector for FSJ4-50B superflexible cable. Captivated center pin. Trimetal body & Gold/Silver center pin. Learn More

ANDREW 1/2" Aluminum Ground Kit Strip Tool for LDF4-50 foam cable. Manually operated for SG Series. Learn More

The Andrew L4A-NMNM-3-P SureFlex cable assembly process uses a 3 foot LDF4-50 1/2 inch superflexible cable with foam dielectric. This coax cable assembly has N Male (silver body, gold pin) connectors installed on each end.The Andrew 3 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

ANDREW 20' SureFlex Jumper Consists of LDF4-50 1/2" Heliax cable with DIN Male conn & DIN Male conn. PREMIUM LOW PIM JUMPER. Learn More

The Andrew L4A-DMDM-30-P SureFlex cable assembly process uses a 30 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN male (silver body, gold pin) connectors installed on each end.The Andrew 30 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

COMMSCOPE EASIAX Plus Automated Cable Preparation Tool for 1/2" coaxial cable. Learn More

COMMSCOPE GPS antenna mount for attachment to a pipe 1-1/2"-3-1/2" OD. Ideal for use on an ice bridge post. Includes clamp and 24" x 1.9" pipe. HDG Learn More

COMMSCOPE Galvanized U Bolt for 3-1/2" pipe. Size 1/2" diameter, 3-5/8" throat, 5" length, 2" thread. Comes with nuts and lock washers. Learn More

COMMSCOPE Universal Snap-In Adapter Block. Attaches to tower with 3/8" hardware or round member adapters. (purchase separately). 10 Pack. Learn More

ANDREW 7/16 DIN Female series EZfit Connector for FXL-780 cable and 520096102/00 cable. Smaller two-piece design for easy installation. USE PROPER PREP TOOL.*This connector has been discontinued and is available until inventory is expended. Learn More

ANDREW BNC Male for 1/4" superflex. Captivated center pin. Self-Clamping body. Learn More

ANDREW mini UHF male (F1MU) connector for FSJ1-50A, 1/4" superflexible Heliax cable. Captivated silver pin, crimp ferrule. Nickle body. Learn More

ANDREW type Fixed/Tuned connector for EW52 elliptical waveguide. CPR137G flange type. Learn More

COMMSCOPE 2 3/8" x 63" Plain end pipe. Hot Dipped Galvanized steel. Learn More

COMMSCOPE Crossover Plate. U-bolt style. 2-3/8" to 2-3/8" OD pipe. Hot dipped galvanized steel. Learn More

The Andrew 7574285-00 blank dummy module is for the node A repeater system. This amplifier module fills any unused slot in the repeater. The Andrew dummy BDA module should be used to maintain correct airflow in the subrack. Learn More

ANDREW N Male series EZfit Connector for FXL-780 and 520096102/00 cables. Smaller two-piece design for easy installation. USE PROPER PREP TOOL. Learn More

COMMSCOPE Clamp Head. Stainless Steel. 3/8" Through Hole. 10 Pack Max loading is triple stack 1-5/8" cable Learn More

COMMSCOPE Safety Grated Waveguide Bridge Channel. 24" x 10'. Learn More

COMMSCOPE universal ground kit for 1/2" to 1-5/8" copper or aluminum, corrugated or smooth cable with 60" lead and field attachable lug. Tinned Learn More

Andrew Solutions EASIAX manual cable preparation tool is made for use with 7/8 inch HELIAX coaxial cable, including: AVA5, LDF5, and VXL5. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More

Andrew EASIAX manual cable preparation tool is made for use with 3/8 inch and 1/2 inch superflex HELIAX coaxial cables, including: FSJ2, FSJ4, ETS2, RXL2 and RXL4. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew EASIAX cable preparation tools. Learn More

COMMSCOPE Universal Snap In Adapter for mounting 1/2"-1-5/8" Snap In hangers to angle or round tower members. Stainless steel. 3/4"pre-punched holes. 10 Pack. Learn More

COMMSCOPE 1/4" x 2-1/2" x 12-1/2" Universal Ground Bar. Made of solid copper with 33 pre-drilled holes. Ideal for all grounding app's incl towers & rooftops. Learn More

COMMSCOPE Click-On Hanger Hardware Kit for 1/2",5/8" or 7/8" coaxial cable. For use with 3 stack hanger in 3/8" size. Constructed of stainless steel. Learn More

COMMSCOPE Support/Hoisting Grip for 1/2" Superflex Cable. Use at 200ft intervals to raise cable on tower. Includes one grip and one support clamp. Learn More

CommScope Lace up hoisting grip for 1-5/8" Coax, EW52 and EW63 waveguides. Use at 200ft intervals to raise cable on tower. Learn More

COMMSCOPE Click-On Hangers. For use with LDF4-50A 1/2" diameter cable. Package of 10. Recommended spacing every 3' up to 150 mph wind speed, 2'over 150 mph. Learn More

COMMSCOPE 1/2" x 18" x 48" Rubber Mat Protects roof surfaces and can be used as a walking pad when required to comply with building codes Learn More

COMMSCOPE Anchor rail assembly. Used for attaching Snap-Ins to strut. Learn More

COMMSCOPE 1/2" x 3-3/4" Wedge Anchor for use in concrete block. 1 per package. Learn More

CommScope Plain Galvanized Pipe 4-1/2" OD x 63" Long. Learn More

COMMSCOPE 10.2-11.7 Waveguide Pressure Window. CPR90G flange. Type WR90. 1.01:1 VSWR. Learn More

Andrew DB636-C omni antenna operates in the frequency band of 450 - 482 MHz. This UHF antenna is a dual skirt dipole fiberglass omnidirectional antenna. The antenna is rugged, durable in design, and features a heavy duty radome for minimum tip deflection. The antenna is capable of being inverted. This 6dB gain UHF antenna has a direct N female connection with a maximum power of 500 watts. This antenna includes the DB365-OS pipe mounting kit for 1.25 - 3.5 inch OD round members. The antenna meets RoHS 2002/95/EC. Learn More

COMMSCOPE Pipe to Pipe Adapter for Vertical Leg. Adapts 1-1/2" thru 3-1/2" OD pipe to 4" thru 9" OD pipe. Kit of 2. Hot dipped galv steel. Learn More

CommScope SnapStak Snap-in hangers for 7/8" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction Learn More

COMMSCOPE Heavy Duty Pipe to Pipe Clamp. Joins Two 1-1/2"OD to 3-1/2" OD round members. 1/2" x 10" threaded rod. Kit of 2. Learn More

COMMSCOPE Hardware Kit. 3/8" x 1" fillister head bolts, nuts and lock washers. Heavy gauge stainless steel construction. Kit of 10 sets. Learn More

The Andrew LDF4-50A 1/2 inch foam dielect 50 Ohm coax cable features a 5 inch bending radius that prevents kinking. Learn More

COMMSCOPE Pre-lacedhoisting grip for 1 5/8" Heliax Cable (LDF7-50) and EW52 & EW63 Waveguide. Use at 200ft intervals. Includes one grip and one support clamp. Learn More

The Andrew FSJ4-50B 1/2 inch 50 Ohm coax cable is superflexible and less prone to kinks because of its spiral copper corrugated outer conductor. The superflex cable features a 1.25 inch bending radius. This coaxial cable transmission line has a copper-clad aluminum center conductor. Maximum frequency capacity is 10.2 GHz. The Andrew 1/2 inch superflexible coax cable is available in bulk and is priced per foot. Learn More

Andrew DB408-B omnidirectional, exposed dipole antenna operates in the frequency range 450 - 470 MHz. The 6.6 dB gain UHF dipole omni can handle 250 watts. The antenna comes with an N male connector on the end of a flexible lead. Included with the antenna is a DB365-OS pipe mounting kit for 1.25 - 3.5 inch OD round members. This Andrew Solutions 450 - 470 MHz UHF antenna featuring broad response is ideal for duplex operations. The DB408 is extremely rugged, has extra heavy-duty construction and is moisture and lightening resistant. The antenna meets RoHS 2002/95/EC. Learn More

The Andrew Solutions DB5001-SP5 antenna side mount kit is for mounting Andrew antennas DB222, DB224, DB264, DB314, and DB315. This antenna mounting kit features galvanized steel construction and stainless steel hardware. The side mount kit bracket will hold antenna 20 inches away from the tower with 5 inch diameter legs.The Andrew antenna side mounting kit includes 5 inch clamps, bracket, top sway brace, V-bolts, and mounting hardware. Learn More

COMMSCOPE mounting clamps for mounting antenna to members up to 3.5" OD. No center weld section, but incl. 4 straps per clamp. Galvanized steel. Set of 2. Learn More

Andrew DB420-B omnidirectional, exposed dipole antenna operates in the 450 - 470 MHz frequency range. This UHF omni dipole antenna is 9.2 dBd gain, can handle up to 250 watts and is terminated with an N male connector at the end of a flexible lead. Included wit the antenna is a DB356-OS pipe mount lit for 1.25 - 3.5 inch OD round members. Andrew Solutions 450 - 470 MHz UHF antenna featuring broad response is ideal for duplex operations and is extremely rugged. This antenna meets RoHS 2002/95/EC.
Additional shipping charges may apply- ships freight only. Learn More

The Andrew 7577548-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the AWS band (1710-1755 MHz / 2110-2155 MHz). The digital channel BDA module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More

The Andrew 7577552-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the 1900 MHz PCS band (1850-1910 MHz / 1930-1995 MHz). The digital channel module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More

The Andrew 7577540-01 NODE A digital channel module is where the uplink and downlink signals are filtered and amplified. This amplifier module is designed for the 850 MHz cellular band (824 - 849 MHz / 869 - 894 MHz). The digital channel BDA module features 84 dB gain and 27dBm UL/30dBm DL composite power. Antenna port is N female connector type. The NODE A amplifier module easily slides into the subrack.WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Learn More

Andrew DB224-A 150 - 160 MHz omni, exposed dipole antenna. This adjustable field omni antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-0S pipe mount kit for 1.25 - 3.5 inch OD round members. Maximum power input is 500 watts. This four-bay exposed dipole VHF antenna can be arranged in an offset pattern producing a higher gain of 9 dB. Omni coverage and a gain of 6 dB can be achieved through a circular pattern. Andrew Solutions DB224 omni antenna meets RoHS 2002/95/EC. Learn More

Andrew DB499-K is a heavy duty yagi antenna operating in the 890 - 960 MHz frequency range. This 7-element, 10 dBd gain yagi antenna is designed for challenging applications. The driven element encased in a radome to prevent corrosion and minimize the effects of severe icing conditions. This yagi has a power input of 150 watts, is terminated with a direct N female connector and includes 2 V-bolts for mounting. The Andrew Solutions rugged, heavy-duty yagi antenna meets RoHS 2002/95/EC. Learn More

Andrew DB222-A exposed dipole quasi-omnidirectional antenna operates in the frequency range 150 - 158 Mhz. This VHF field adjustable dipole antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-OS pipe mount kit for 1.25 - 3.5 inch OD round members. The omni pattern has a gain of 3 dBd and the offset is 6.0 dBd gain. This antenna meets RoHS 2000/295SEC.This Andrew Solutions DB222 omni antenna is weather-resistant and can be mounted on the top or side of a tower. Learn More

DECIBEL vapor wrap connector sealant. 15 pcs - 3" x 4", 15 pcs - 3" x 8". Learn More

The Andrew 224363 cable flare tool is designed for use on LDF4 cables. This cable flare tool is designed to separate foam from the outer conductor of 1/2" coaxial cable. Learn More

COMMSCOPE mounting clamp kit. Fits round members up to 5" O.D. Angle members approx. 4-1/2" on a side. (Set of 2). Learn More

COMMSCOPE 1-1/4" Hanger Grommet for 3/8" Cable, 10 Pack For use 1-1/4" snap-in hangers, clip style hangers, or standard hanger kits. Learn More

CommScope AVA7-50RK 1 5/8" Fire Retadant Foam Cable. Uses AVA7 connectors, not LDF connectors. SIngle run of 400 feet. Learn More

DECIBEL vapor wrap connector sealant. 3" x 50' roll. Approximately 3/16" thick. Learn More

Andrew Solutions EZfit automated coax cable coring and stripping preparation tool is made for use with AVA5 HELIAX 7/8 inch coaxial cable. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently. This drill-driven coring tool also includes a T-handle for manual hand operation.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. For fast, clean, and consistent cable preparations go with Andrew Solutions EZfit drill-driven automated cable preparation tools. Learn More

COMMSCOPE Grommet with single 5mm hole for 1/2" standard or click-on hanger. 10 pack. Learn More

COMMSCOPE mounting clamp set. Used to mount horizontal members to vertical members up to 3" in diameter. Set of 2. Can be used like a cross-over plate. Learn More

COMMSCOPE mounting clamp kit. Fits round member up to 3 1/2" OD. Angle members up to 3" on a side. (Set of two). Dual single-bolt configuration. Learn More

ANDREW 10.5-10.7 GHz connector for EW90 waveguide cable. CPR90G flange type. 1.15 VSWR max. Fixed-tunable. Learn More

ANDREW 13/16" torque wrench for Type-N Coupling Nut for Andrew Cable.Audible click when the proper torque has been reached. 20 Inch Pounds,Tolerance -5/+0 Learn More

COMMSCOPE Standard grounding Kit for 5/8" & 7/8" (85, 90, 127A, 132 waveguide) with 24" lead and factory attached two hole lug. Learn More

ANDREW fixed-tuned flange connector (163SE) for EWP63 & EWP63S elliptical waveguide. Mates with CPR137G flange. Learn More

ANDREW 1-1/4" torque wrench for 7-16 DIN coupling nut. Designed w/ a mechanism to audibly notify the installer that proper torque has been reached. Learn More

The Andrew LDF1-50 1/4 inch foam dielect 50 Ohm coax cable features a 3 inch bending radius that prevents kinking. This coaxial cable has an annular corrugated copper outer conductor with a copper-clad aluminum center conductor. Maximum frequency capacity is 15.8 GHz. The Andrew 1/4 inch standard coax cable with foam dielect is available in bulk and is priced per foot. Learn More

COMMSCOPE Heavy Duty Welded Pipe to Pipe Clamp. Joins Two 1-1/2" OD to 3-1/2" OD round members. 1/2" x 10" threaded rod. Kit of 2. Hot dipped galv. Learn More

Andrew Solutions EASIAX manual cable preparation tool is made for use with 1/4 inch and 1/2 inch Superflex HELIAX coaxial cables, including FSJ1-50A and FSJ4-50B. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More

COMMSCOPE "SNAPSTAK" Snap-in hangers for 1-5/8" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction Learn More

The Andrew HJ5-50 7/8 inch coaxial cable features an air dielectric. This 50 Ohm coax cable has an annular corrugated copper outer conductor and a smooth copper tube center conductor. The air cable has a 10 inch bending radius. This transmission line has a maximum frequency capacity of 5.2 GHz.The Andrew 7/8 inch coaxial cable with air dielectric is available in bulk and is priced per foot. Learn More

COMMSCOPE Small star support T bracket. Holds up to twelve hangers. 1-1/2" - 5-9/16" OD. Perpendicular style with hanger plates parallel to each other. Learn More

The Andrew F1A-PNMNM-4 Sureflex cable assembly uses a 4 foot FSJ1-50A 1/4 inch superflexible cable with foam dielectric. This coax cable assembly has N male (silver body, gold pin) connectors installed on each end.The Andrew 4 foot cable jumper assembly is 100 percent waterproof and uses a unique double solder patented technique to give excellent system performance. Learn More

COMMSCOPE 3M (TM) cold shrink weatherproofing Kit. Seals the connection between a 7/8" and 1/4" jumper w/N or DIN Connector. Learn More

CommScope Triple Tee style trapeze 24" wide kit. For use with waveguide channels to support 24 runs of coax. Learn More

CommScope Plain Galvanized Pipe 3-1/2" OD x 174" Long. Learn More

COMMSCOPE Pipe to Pipe Clamp. Joins Two 1-1/2" OD to 3-1/2" OD round members, 1/2" x 10" threaded rod. Kit of 2. Hot dipped galvanized steel. Learn More

ANDREW N Male series EZfit Connector for 1-1/4" HELIAX AVA and FXL cables. Smaller One-piece design for easy installation. USE PROPER PREP TOOL. Learn More

ANDREW N Male series EZfit Connector for 1-5/8" HELIAX AVA and FXL cables. Smaller two-piece design for easy installation. USE PROPER PREP TOOL. Learn More

ANDREW DIN Male Positive Stop connector for AVA, AL, LDF & VXL7-50 1-5/8" foam cable. Trimetal plated body, captivated silver center pin. Learn More

The Andrew L4A-NMDM-6-P SureFlex cable assembly process uses a 6 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN Male and N Male connectors installed on each end.The Andrew 6 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

CommScope Plain End Pipe 2-3/8" OD x 84" long. Galvanized Steel. Learn More

COMMSCOPE Self-locking Hanger for 1/2" Radiating Cable. 100 per package. Black in color. Learn More

COMMSCOPE Galvanized U Bolt for 2-3/8" pipe. Size 1/2" diameter, 2-1/2" throat, 4" length, 2" thread. Comes with nuts and lock washers. Learn More

CommScope standard ground kit for 1-5/8", EW52 and EW63 waveguide with 60" and field attachable lug. Learn More

COMMSCOPE Galvanized steel adjustable wall mounts w/ 12" Stand-off. Incl 1/2" wall anchors. Set of two. Order 2 3/8" or 4 1/2"OD pipe & U-bolts separately. Learn More

ANDREW DIN Female Positive Stop connector for AVA, AL, LDF & VXL7-50 1-5/8" foam cable. Trimetal plated body, captivated silver center pin. Learn More

The Andrew CT-7812 combination tool aids in field installation of connectors on 1/2 and 7/8 inch coax cables. The Andrew combination tool / combination wrench features open wrench ends, chamfer tool, file, inner conductor gauge, and jacket cut-off gauge.Works with Heliax 2.0 and Positive Stop connectors. Learn More

ANDREW N Female series EZfit Connector for FXL-780 and 520096102/00 cables. Smaller two-piece design for easy installation. USE PROPER PREP TOOL. Learn More

The Andrew FSJ4RK-50B 1/2 inch superflex cable features a black fire retardant jacket. This 50 Ohm coax cable is superflexible and less prone to kinks because of its spiral copper corrugated outer conductor. The coaxial cable transmission line has a copper-clad aluminum center conductor. Maximum frequency capacity is 10.2 GHz. The Andrew 1/2 inch superflexible coax cable is available in bulk and is priced per foot. Learn More

ANDREW DIN Female Positive Stop for HL4RP, LDF4 & AL4RPV. Self Flare with self captivated silver plated center pin. Tri-metal plated body. Learn More

ANDREW N Male Postive Lock 1/4" for LDF1-50 cable. Hex Head, captivated silver center pin, trimetal body. Learn More

ANDREW N Female Positive Stop connector for AVA7, VXL7, AL7 & LDF7 1-5/8" cable. Trimetal plated body captivated silver center pin. Learn More

COMMSCOPE stand. port cushion. For 1-1/4" corrugated cables. One hole. Learn More

ANDREW N-male right angle for 1/4" superflex. Hex head. Captivated center pin. Self-clamping. Trimetal plated body and Gold plated pin. Learn More

The Andrew L4A-NMNM-15-P SureFlex cable assembly process uses a 15 foot LDF4-50 1/2 inch superflexible cable with foam dielectric. This coax cable assembly has N Male (silver body, gold pin) connectors installed on each end.The Andrew 15 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

ANDREW Weather proof Fusion tape. 1-1/2" X 15' self fusing, formulated of silicone rubber. Bonds together, but easily removed if necessary. Learn More

The Andrew Solutions DB5001 antenna side mount kit is for mounting Andrew antennas DB222, DB224, DB264, DB314, and DB315. This antenna mounting kit features galvanized steel construction and stainless steel hardware. The side mount kit bracket will hold antenna 20 inches away from the tower with 3 inch diameter legs.The Andrew antenna side mounting kit includes 3 inch clamps, bracket, top sway brace, V-bolts, and mounting hardware. Learn More

The Andrew LDF4RK-50A 1/2 inch foam HELIAX coaxial cable features a black fire retardant jacket. Learn More

ANDREW DIN Female Positive Stop for 7/8" AL5-50 & AVA5-50. Ring flare attachment with captivated center pin. Trimetal plated. Learn More

The Andrew FSJ1RK-50B 1/4 inch superflex cable has a black fire-retardant jacket. This 50 Ohm coax cable is superflexible and less prone to kinks because of a spiral corrugated outer conductor. The coaxial cable transmission line has a copper-clad aluminum center conductor. Maximum frequency is 18 GHz. The Andrew 1/4 inch superflex coax cable is available in bulk and is cut per foot. Learn More

COMMSCOPE SureGround for 7/8" Alum or Copper, corrugated or smooth cable w/ 24" #6 copper ground wire lead. Inlcudes factory attached two hole lug. Learn More

ANDREW N Female series EZfit Connector for 1-1/4" HELIAX AVA and FXL cables. Smaller One-piece design for easy installation. USE PROPER PREP TOOL. Learn More

COMMSCOPE Stand-off bracket for wood pole antenna mounting. Learn More

ANDREW CPT-BK12U Blade kit Learn More

CommScope Plain End Pipe. 2 7/8" OD x 96" long. Galvanized steel. Learn More

COMMSCOPE 1/2" hanger adapter grommet. For use with 3/8" cable and 1/2" snap-in hangers, clip style hangers, or standard hanger kits. 10 per package Learn More

ANDREW DIN Female end cap kit. Learn More

ANDREW 7/16" DIN Male right angle Connector for FSJ4-50B superflexible cable. Captivated center pin. Tri-metal body & gold plated silver center pin. Learn More

ANDREW N- Male Hexhead for 3/8" FSJ2-50 cable. Tri-metal plated body with silver Captivated center pin. Crush-flare Outer Contact. Positive Lock style. Learn More

SnapSeal 4" boot assembly kit w/ 3 hole for 7/8" corrugated coax. Learn More

ANDREW N Male high frequency for 1/4" superflex. Hex Head solder on center pin. Self-clamping. Learn More

ANDREW 10.2-11.7 GHz (EW90) elliptical wave guide, standard jacket. **Use sku 485745 if ordering cable w/out attached connectors. Learn More

Andrew Solutions EASIAX manual cable preparation tool is made for use with 1/2 inch HELIAX coaxial cable, including: LDF4-50, HL4RP-50 and RXL4 series inch foam dielectric cables. Andrew cable hand prep tools prepare cable quickly and consistently. This cable cutting tool cuts precisely at the crest of the copper corrugation and at the exact distance required for easy connector attachment. The cable stripper tool produces a clean cut which makes flaring the coax cable easier. The precise blade depth makes it impossible to cut the inner conductor. For fast, clean, and consistent HELIAX cable preparations go with Andrew Solutions EASIAX manual cable preparation tools. Learn More

Butterfly Hangers for 1/2" or 3/8" coaxiak cable and elliptical waveguide 180, 220, 240. Hardware not included. Heavy gauge stainless steel. Spacing varies depending on wind speed & cable.10 pack. Learn More

CommScope Plain Galvanized Pipe 2-3/8" OD x 126" Long. Learn More

ANDREW 7.125-8.500 GHz (EW77) elliptical wave guide, standard jacket. **Use sku 485745 if ordering cable w/out attached connectors. Learn More

ANDREW N Female for 1/4" superflex. solder on center pin. Self-Flare. Learn More

CommScope Snap-In Hangers for EW52 Waveguide attach without hardware. Constucted of heavy gauge stainless steel. Spacing varies depending on wind. Learn More

COMMSCOPE 4" Cable Entry Boot. For 1 run of EW90. Use with Multiple Entrance Wall Plate. Learn More

COMMSCOPE "SNAPSTAK" Snap-in hangers for 1/2" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction Learn More

COMMSCOPE Two-hole compression ground lug. Terminates #6 AWG cable. 3/8" hole w/ slot will fit 0.750", .815" or 1.00" hole spacing. Pack of ten. Learn More

ANDREW 5.60-6.425 GHz (EW52) elliptical wave guide, standard jacket. **Use sku 485745 if ordering cable w/out attached connectors. Learn More

COMMSCOPE Hardware Kit. 3/8" x 3/4" fillister head bolts, nuts and lock washers. Heavy gauge stainless steel construction. Kit of 10 sets. Learn More

COMMSCOPE "SNAPSTAK" Snap-in hangers for 1-1/4" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction Learn More

COMMSCOPE Panel Antenna Stand-off Bracket. 36" Stand-off distance. A 2-3/8" OD x 70" pipe is integrated into the bracket. Learn More

COMMSCOPE Hoisting Grip for 7/8" Corrugated Cables. Use at 200ft intervals to raise cable on tower. A optional support clamp can be used to achieve optimum grip. Learn More

Andrew Solutions replacement blade kit is made for use with: CPT-L4ARC1, CPT-L45ARC, CPT-E2L2N, and CPT-E2L2DIN automated cable prep tools. Each blade kit contains four blades. The blade life lasts up to 150 cable preparations.Be prepared. Damaged or dull blades cause inconsistent cuts and can slow, or even stop, an installation. A cable preparation tool performs best with a sharp blade. Andrew Solutions replacement blade kit ensures consistent, clean, and quick cable preparation. Learn More

COMMSCOPE Connector/Splice Weatherproofing Kit. 6 rolls of 2-1/2" x 24" butyl tape 2 rolls of 3/4" x 66' black electrical tape & 1 roll 2" x 20' black elec tape. Learn More

COMMSCOPE Threaded Rod Support kit of 5. Includes 3/8" x 12" rod, nuts, washers, ceiling bracket. Learn More

ANDREW SnapStak Hanger Tool for installation and removal of SnapStak snap-in hangers. Learn More

COMMSCOPE Crossover Plate. U-bolt style. 2-3/8" to 3-1/2" OD pipe. Hot dipped galvanized steel. Learn More

COMMSCOPE Grounding Kit for 1/4" & 3/8" diameter cables. Includes 24" ground wire w/ solid copper strap, weatherproffing, and two hole lug. Learn More

CommScope 2-3/8" OD x 72" Long Plain end pipe. Hot Dipped Galvanized steel. Learn More

COMMSCOPE Stainless steel Angle Adapter. Fastens hangers to tower angle members up to 7/8" thick. For use w/ 1/2" to 4" cables. 10 per package. Learn More

The Andrew FSJ2-50 3/8 inch 50 Ohm coax cable is superflexible and less prone to kinks because of its spiral copper corrugated outer conductor. The superflex cable features a 1 inch bending radius. This coaxial cable transmission line has a copper-clad aluminum center conductor. Maximum frequency capacity is 13.4 GHz. The Andrew 3/8 inch superflexible cable is available in bulk and is priced per foot. Learn More

ANDREW 5.85-8.20 GHz 24" FlexTwist for WR137, with interface types CPR137G and CPR137G, 600 mm. Learn More

CommScope cable hanger kit for use with 7/8" diameter cables and elliptical waveguide 85 and 90. Package of ten. Use one every three feet. Learn More

ANDREW AVA7-50 1 5/8" foam cable. 50 ohm, annular corrugated copper outer conductor, corrugated copper tube inner conductor. Uses AVA7 connectors, not LDF Learn More

COMMSCOPE Click-On Hangers. For use with AVA5-50 & LDF5-50A 7/8" diameter cable. Pkg of 10. Rec spacing every 4' up to 100mph wind speed,3' up to 150. Learn More

The Andrew Solutions DB5007 antenna side mount kit is for mounting Andrew antennas DB404, DB536, DB553, DB580, DB803 and DB806. This antenna mounting kit features galvanized steel construction and stainless steel hardware. The side mount kit bracket will hold antenna 13 inches away from the tower with 3 inch diameter legs.The Andrew antenna side mounting kit includes DB375 clamps, bracket, top sway brace, V-bolts, and mounting hardware. Learn More

CommScope Plain end pipe. 2-3/8" OD x 24" long. Galvanized steel. Learn More

ANDREW 5.925-7.125 GHz (EW63) elliptical wave guide, standard jacket. **All waveguide needs to be pressurized before shipping. Add sku# 576827 to the order or worksheet. Learn More

ANDREW N-female Connector for FSJ4-50B superflexible cable. Captivated center pin. Silver body & Gold center pin. Learn More

COMMSCOPE Side Mount Bracket for 24" wide waveguide bridge. Use with 3-1/2" OD pipe column. Includes J-hooks for quick and easy installation channel. Learn More

CommScope Plain end pipe. 2-3/8" OD x 48" long. Galvanized steel. Learn More

Andrew Solutions EASIAX Plus automated cable coring and stripping preparation tool is made for use with 7/8 inch coaxial cable. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. Blade life lasts up to 150 cable preparations. For fast, clean, and consistent cable preparations go with Andrew Solutions EASIAX Plus drill-driven automated cable preparation tools. Learn More

COMMSCOPE Rubber Sleeper Pad. 4" x 1/4" x 10' rubber pad to protect roof surface and prevents slippage. SLEEPERS NOT INCLUDED. Learn More

ANDREW SMA Male for 1/4" superflex. Cativated center pin with clamp style body attachment. Learn More

COMMSCOPE Hoisting Grip for 1/2" Corrugated Cables. Use at 200ft intervals to raise cable on tower. Can also be used with EW180, EW220 & EW240 waveguides. Learn More

CommScope Stiff Arm Mounting Bracket. Creates a stiff arm out of a separately ordered 2 3/8"OD pipe. Mounts to 2-3/8" thru 4-1/2" round or angle legs. Learn More

ANDREW N Male Connector for FSJ4-50B superflexible cable. Hex head, captivated center pin. Silver body & gold plated Pin. Version 2. Learn More

The Andrew FSJ1-50A 1/4 inch 50 Ohm coax cable is superflexible because of a spiral corrugated outer conductor. Learn More

CommScope Standard Hangers for EW63 hardware not included. Heavy gauge stainless steel. Spacing varies depending on wind speed & cable.10 pack. Learn More

The Andrew F1A-PNMNM-6 Sureflex cable assembly uses a 6 foot FSJ1-50A 1/4 inch superflexible cable with foam dielectric. This coax cable assembly has premium N male connectors installed on both ends.The Andrew 6 foot cable jumper assembly is 100 percent waterproof and uses a unique double solder patented technique to give excellent system performance. Learn More

COMMSCOPE Click-On Hanger Hardware Kit for 1/2",5/8" or 7/8" coaxial cable. For use with 1 stack hanger in 3/8" size. Constructed of stainless steel. Learn More

COMMSCOPE reattachment kit for EW90 and EWP90 and EWP90S elliptical waveguide connectors. Includes rubber gasket partsexcept flange gasket. Learn More

COMMSCOPE 5.85-8.2 GHz waveguide pressure window. CPR137G flange type. Learn More

COMMSCOPE Grounding Kit for 1/2" diameter cables. Two hole lug for grounding to a tower/ bus bar. Incl 24" grnd cable w/ solid copper strap and weatherproofing. Learn More

COMMSCOPE Saftey Grated Waveguide Bridge Kit. 12" wide x 10' long with two 13' 4" high direct burial posts. Hot dip galvanized steel. Learn More

COMMSCOPE Replacement Blade Kit for 470164 (MCPT-1412) and 411530 (MCPT-3812) cutting tools. Learn More

COMMSCOPE Adapter Clamp Set for up to 6 1/2", 60 Degree angle legs,straight or tapered legs. All mounting hardware is included. Learn More

CommScope Plain End Galvanized Pipe 2-3/8" OD x 96" Long. Learn More

CommScope elbow for 3/8" polyethylene tubing, with 1/8" male pipe thread. Learn More

COMMSCOPE Heavy Duty Pipe to Pipe Clamp. Joins Two 2-3/8" OD to 5" OD round members. 5/8" x 14" threaded rod. Kit of 2. Hot dipped galvanized steel. Learn More

COMMSCOPE Pipe to Pipe Adapter for Vertical Leg. Adapts 1-1/2" thru 3-1/2" OD pipe to 2-3/8" thru 5" OD pipe. Kit of 2. Hot dipped galv steel. Learn More

ANDREW 7/16" Din-Male Connector for FSJ4-50B superflexible cable. Captivated center pin. Silver body & center pin. Torque wrench 469123 purchased separatel Learn More

Andrew Solutions EASIAX Plus automated cable coring and stripping preparation tool is made for use with FSJ4-50B HELIAX 1/2 inch version-two connectors. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. Blade life lasts up to 150 cable preparations. For fast, clean, and consistent cable preparations go with Andrew Solutions EASIAX Plus drill-driven automated cable preparation tools. Learn More

ANDREW WR137 Waveguide to Coax transition CPR137G to Type N connector. N connector is female. 5.85-8.2 GHz VSWR: 1.10:1 Learn More

COMMSCOPE 3M (TM) cold shrink weatherproofing Kit. Seals the connection between the direct termination of an antenna & 1/2" jumper. Installs in less than 3 minutes. Learn More

COMMSCOPE 3M (TM) cold shrink weatherproofing Kit. Seals the connection between two separate lines of 3/8-1/2" cable. Installs in less than three minutes. Learn More

Andrew LDF2-50 3/8 inch foam dielect 50 Ohm coax cable features a 3.75 inch bending radius. This coaxial cable has an annular corrugated copper outer conductor that prevents kinking with a copper-clad aluminum center conductor. Maximum frequency capacity is 13.5 GHz. Learn More

COMMSCOPE crossover clamp. 1 1/4" galvanized steel plate. "U" bolts to accommodate 1" to 4" tower leg with up to a 2 7/8" intersecting cross pipe. Learn More

The Andrew CNT400P braided coaxial cable (white jacket) is similar to RG8 but with lower loss and plenum-rated. This 50 Ohm coax cable has a 90 percent coverage braid shield for low loss. This plenum-rated transmission line offers similar performance compared to corrugated copper cables but provides higher flexibility and simplified connectorization with LMR-400 connectors. The braided coax, plenum grade cable can be used in almost any application where handling characteristics, improved shielding and low loss is required. The Andrew WBC-400 plenum-rated, low loss coaxial cable with white jacket is available in bulk and is priced per foot. Learn More

SnapStak Hangers for 1/2 in coaxial cable with quadruple stack capability and includes reinforcement bar. Learn More

CommScope V-Stabilizer Tower Kit. Learn More

CommScope Plain End Pipe 2-7/8" x 150" Learn More

VSTRUTP3KIT inboard side strut kit, USE WITH 4', 6' AND VALULINE ANTENNAS, BRACKETS & CLAM Learn More

SEC412 4" port, BOOTS, 1/2" CABLE, 4 HOLE Learn More

WGB463 4" port, BOOTS, EW63 / EWP63, 1 HOLE Learn More

The CommScope 204673-2A 4" two port aluminum entrance panel. It includes an entry cap and hardware. Learn More

ANDREW Click-On Hanger Hardware Kit for 1-1/4" or 1-5/8" coaxial cable. For use with 3 stack hanger in 3/8" size. Constructed of stainless steel. Learn More

CommScope standard ground kit for 1-5/8, EW52 & EW63 with 24 factory attached two hole universal lug and weatherproofing. Learn More

CommScope Lace-up Hoisting Grip for 5/8" coaxial cable and elliptical waveguides 85, 90, 127, and 132. Learn More

CommScope Lace Up Hoisting Grip for 3/8" Cable. Learn More

Learn More

PWRT208S 8 AWG gauge, BLACK, 2, MULTI-CONDUCTOR, ELECTRONIC CABLES Learn More

E15S09P78 698-894 / 1850-1990 MHz, 12 DB GAIN, TOWER TOP, RF AMPLIFIERS, 7/16 DIN(F) Learn More

PC034 pipe caps, 3-1/2" OD PIPE, BRIDGE PIPE COLUMN, BRIDGE Learn More

Tinned Copper Ground Buss Bar, 1/4 in x 4 in x 24 in Learn More

U-Bolt for 2-7/8" pipe. 1/2" x 3" x 5-1/4" Learn More

Remote Radio Head Power Cable. 10 AWG 2 conductor with shield. 600 Volt, tinned copper braid, 10 AWG ground wire and 14 AWG drain wire. Learn More

Andrew Solutions EASIAX Plus automated cable coring and stripping preparation tool is made for use with LDF4-50A HELIAX 1/2 inch coaxial cable. Andrew drill-driven automated cable prep tools prepare cable quickly and consistently.Simply insert the coax cable prep tool onto a reversible power drill, close the chuck, and strip the cable in as little as ten seconds. The rust-proof anodized aluminum stripper removes the cable jacket, outer conductor, and foam. Plus, it cuts back and chamfers the inner conductor to the correct dimensions for connector attachment. Blade life lasts up to 150 cable preparations. For fast, clean, and consistent cable preparations go with Andrew Solutions EASIAX Plus drill-driven automated cable preparation tools. Learn More

COMMSCOPE 30' 2F (SM) 6-OVP to RRU Hybrid Tail Learn More

CommScope 100' 1/2" Stainless Steel Banding. Learn More

CommScope 4" Entry Port Sealing Cap. Use to cap unused entry panel ports. Learn More

CommScope 3-1/2" OD x 150" (12'6") Pipe Learn More

COMMSCOPE Lace-up Hoisting Grip with Tie-Wraps for HELIAX FiberFeed Cables, HFT1206 series. 25 inches Grip Lenth, Leader length of 8 inches. Attach at 200' intervals, made of stainless steel. Learn More

The Andrew L4A-DMDM-8-P-SGW SureFlex cable with Sureguard weatherproofing assembly process uses a 8 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN male (silver body, gold pin) connectors installed on each end. The Andrew 8 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

CommScope SnapStak Snap-in hangers for 7/8" corrugated cable. The hanger installs in 3/4" holes in support structures. Stainless steel construction. Quadruple stack capability, includes reinforcement bar. Learn More

The Andrew L4A-DMDM-10-P-SGW SureFlex cable with Sureguard weatherproofing assembly process uses a 10 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN male (silver body, gold pin) connectors installed on each end. The Andrew 10 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

The Andrew L4A-DMDR-6-P-SWG SureFlex cable with Sureguard weatherproofing assembly process uses a 6 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN Male and Right Angle DIN Male connectors installed on each end. The Andrew 6 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

Used to cover an unused combiner module port in the NODE A chassis. Learn More

NODE A RF combiner module for use with 700 and 800 MHz Public Safety amplifier modules. Slides into either the A2 or A4 subrack. 758-824/851-869 MHz. Will not work for 800 MHz only applications Learn More

The Andrew L4A-DMDM-12-P-SGW SureFlex cable with Sureguard weatherproofing assembly process uses a 12 foot LDF4-50 1/2 inch foam cable with foam dielectric. This coax cable assembly has DIN male (silver body, gold pin) connectors installed on each end. The Andrew 12 foot cable jumper assembly prohibits water ingress mated or unmated; IP66 & IP68 rated. Each assembly comes individually labeled with guaranteed PIM, VSWR and DTF performance values. A 10 year warranty is also included. Learn More

ANDREW 10' SureFlex Jumper Consists of FSJ4-50 1/2" Heliax cable with DIN Male conn & DIN Male conn. PREMIUM LOW PIM JUMPER with Sureguard weatherproofing. Learn More

COMMSCOPE 1/2" Plenum Air 50 ohm cable. HL4RPV-50. Uses LDF4 connectors. Off White.*No automated prep tool available.MCPT-L4 is the prep tool that works. Learn More

CommScope Universal angle adapter kit for snap-in hangers. Insert not included. Learn More

COMMSCOPE Tinned Copper Ground Buss Bar, 1/4 in x 4 in x 20 in. Learn More

1/4" x 4" x 14" Universal Ground Bar. Made of solid copper with 30 pairs of universal 3/8" hole over 3/8" x 5/8" slot. Wall or tower mount. Learn More

ANDREW I-LINE Tower Stand-off Adapter. Handles 3/8" hardware. Stainless steel. Order hose clamps separately, 10 pack. Tapped stand-off Adaptors provide 2" stand-off distance and feature a hole for 3/8" hardware. Includes all necessary slotted hex head bolts, hex nuts and lock washers. Stand-offs are slotted to accept round member adapters or banding strap for mounting on any size round tower member. Stainless steel. Learn More

ANDREW 1/4" x 2" x 10" Universal Ground Bar. Made of solid copper with 10 pairs of universal 3/8" hole over 3/8" x 5/8" slot. Wall or tower mount. Andrew's Universal Ground Bar is competitively priced and offers the mounting flexibility so often needed at sites. This solid copper bar accommodates vertical and 90 degree mounting configurations and provides a central point to collect grounding leads. Learn More

COMMSCOPE 1/4" x 2" x 10" universal ground bar. 10 pairs of 7/16" holes over 7/16" x 5/8" slots. Wall or tower mountable. Tinned Learn More

Learn More

ANDREW Nylon Cable Tie Kit consists of 50 pieces of Weather resistant straps for attaching 1/4" to 1/2" cables. Learn More

The Commscope HELIAX Standard Air Dielectric Coaxial Cable, corrugated copper, 1-5/8 in, black PE jacket. Learn More

Universal Stainless Steel Angle Adapter for use with Standard or Snap-in hangers. 3/8" tapped hole. Has two 3/4" holes and one insert for use with a butterfly hanger. Learn More

Learn More

COMMSCOPE Torque Wrench for coupling torque of 4.3-10 connectors. 22 mm opening. Learn More

DLC-DLC SM Distribution Fiber, 2F, 5m Learn More

CommScope Angle Adapter with 3/8" tapped holes, adapts hangers to angle members, and provides a high strength solution. Includes adapters, set bolt, and hanger hardware kit. Learn More

CommScope N Male for 1/4" superflex FSJ1-50A. 0-6000 MHz. Hex Head captivated center pin. Self-clamping. Learn More

CommScope fiber management rack, 2U, 12 Fiber Capacity, with sliding drawer. Learn More

COMMSCOPE Snap-In Stand-Off Adapter with 3/4" hole. Learn More

ANDREW 4" Cushion with (1) 3/8" hole and (2) 7/8" Holes. Learn More

The Andrew ATCB-B01-010 10 meter remote downtilt-control antenna cable assembly is used to feed data and power from the controller to the remote downtilt electrical system components. This cable jumper utilizes 10 meters of Tele-tilt cable. The jumper assembly has an AISG 8-pin socket screw lock and IP67 male and female DIN connectors. Learn More

DLC-DLC SM Distribution Fiber, 2F, 10m Learn More

The Andrew ATCB-B01-001 1 meter remote downtilt-control antenna cable assembly is used to feed data and power from the controller to the remote downtilt electrical system components. This cable jumper utilizes 1 meter of Tele-tilt cable. The jumper assembly has an AISG 8-pin socket screw lock and IP67 male and female DIN connectors. Learn More

COMMSCOPE 2-3 inch stainless steel round member adapter. 10 PACK. Learn More

CommScope HELIAX FiberFeed Weatherproofing Shroud Compatible with RRUS11, RRUS12 and Air Antenna Interfaces. Learn More

COMMSCOPE Female End Cap Assembly for 4.3-10 series and 4.1-9.5 DIN connectors. Learn More

Andrew DB224-C covers the 164 - 174 MHz omni, exposed dipole antenna. This field adjustable VHF omni antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-OS pipe mount kit for 1.25 - 3.5 inch OD round members. The omni pattern has a 6 dBd gain and the offset has 9 dBd gain. The Andrew Solutions omni, exposed dipole antenna meets RoHS 2002/95/EC. Learn More

Andrew DB630-C omni antenna operates in the frequency range 450 - 482 MHz. This unity gain UHF antenna features a rugged, durable design with a heavy duty radome for minimum tip deflection. The antenna is capable of being inverted. The antenna is terminated with an N female connector and includes the DB365-OS pipe mounting kit for 1.25 - 3.5 inch OD round members. This antenna meets RoHS 2002/95/EC. Learn More

COMMSCOPE Compact SureGround Plus for 1/2" cable. Consists of a 45" factory assembled ground strap, Field installed 2 hole lug. Tinned copper contact strap. Learn More

COMMSCOPE Galvanized U Bolt for 2-3/8" pipe. Size 3/8" diameter, 2-1/2" throat, 4" length, 2" thread. Comes with nuts and lock washers. Learn More

The Andrew AL4RPV-50 1/2 inch plenum-rated coaxial cable features an air dielectric. This 50 Ohm coax cable has an aluminum outer conductor and a copper-clad aluminuminner conductor. The jacket is off white. This transmission line uses L4Txx-PSA style connectors. Maximum frequency capacity is 6.0 GHz.The Andrew 1/2 inch plenum-rated coaxial cable with air dielectric is available in bulk and is priced per foot.No automated prep tool available for this air dielectric cable. Learn More

COMMSCOPE Cantilever wall mount bracket. Accepts standard 2 3/8" OD pipes. Stands pipe 2.75" off wall. Learn More

ANDREW N Male Right Angle Postive Stop connector for LDF4-50A. Self Flare with self captivated silver plated center pin & tri-metal plated body. Learn More

ANDREW N Male Positive Lock for 3/8" LDF2-50 cable. Trimetal plated body with a silver center pin. Learn More

The Andrew 7597821 indoor wall mounting kit is for both node A2 and node A4 chassis. Additional mounting kits are available for outdoor wall mounting and outdoor pole mounting. Learn More

ANDREW Right Angle 7/16 DIN Male Postive Stop connector for LDF4-50A. Self Flare with self captivated center pin.Trimetal plated & gold plated center pin. Learn More

COMMSCOPE stand. port cushion. For 7/8" corrugated cables. One hole. Learn More

COMMSCOPE stand. port cushion. For 1/2" corrugated cables. Three hole. Learn More

COMMSCOPE stand. port cushion. For 1/2" corrugated cables. Two hole. Learn More

ANDREW 700 MHz LTE SISO amplifier module for NODE A repeater. 30dBm UL/27dBm DL composite power. 84dB gain. Slides into subrack. Learn More

COMMSCOPE 1-1/4" Hanger Grommet for 5/8" Cable, 10 Pack For use 1-1/4" snap-in hangers, clip style hangers, or standard hanger kits. Learn More

Andrew DB589-Y collinear omni antenna operates in the 890 - 960 MHz frequency range. This light weight fiberglass low profile omni antenna is ideal for low to moderate gain applications. The DB589-Y provides 9 dBd gain, has a maximum power input of 300 watts and is terminated with an N Female connector at the bottom of the antenna. V-bolts are included for mounting. This omnidirectional antenna meets RoHS 2002/95/EC.Andrew Solutions collinear antenna DB589-Y is designed with horizon blue radome for increased durability. Learn More

Andrew DB224-E, 138 - 150 MHz omni exposed dipole antenna. This field adjustable VHF omni antenna has a maximum power input of 500 watts. A harness with N male connection is included along with the DB365-OS pipe mount kit for 1.25 - 3.5 inch OD round members. The omni pattern has 6 dBd gain and the offset has 9 dBd gain. The Andrew Solutions omni, exposed dipole antenna meets RoHS 202/95/EC. Learn More

COMMSCOPE Compact SureGround Plus for 7/8" cable. Consists of a 45" factory assembled ground strap with a two hole lug. Tinned copper contact strap. Learn More

COMMSCOPE SureGround for 1/2" Al or Cu corrugated or smoothwall coaxial cable. Tinned copper clip with 48" #6 copper bond & field attached, 2 hole lug. Learn More

ANDREW N Female series EZfit Connector for 1-5/8" HELIAX AVA and FXL cables. Smaller two-piece design for easy installation. USE PROPER PREP TOOL. Learn More